Double-Lip Seal, Type L. Double-lip L seals are made of thermoplastic elastomer (TPE) and can be used for peripheral speeds of up to 13 m/s (2600 ft/min). In all other aspects, they are the same as...
Double-Lip Seal, Type L. Double-lip L seals are made of thermoplastic elastomer (TPE) and can be used for peripheral speeds of up to 13 m/s (2600 ft/min). In all other aspects, they are the same as...
The SKF Plummer block housings for bearings with a cylindrical bore, with standard seals has overall length up to 345 mm.Lock nut, lock washer and locating rings suggested
The SKF Plummer block housings for bearings with a cylindrical bore, with standard seals has overall length up to 255 mm.Lock nut, lock washer and locating rings suggested
The SKF Plummer block housings for bearings with a cylindrical bore, with standard seals has overall length up to 255 mm.Lock nut, lock washer and locating rings suggested
The SKF Plummer block housings for bearings with a cylindrical bore, with standard seals has overall length up to 205 mm.Lock nut, lock washer and locating rings suggested
The SKF Plummer block housings for bearings with a cylindrical bore, with standard seals has overall length up to 410 mm.Lock nut, lock washer and locating rings suggested
The SKF Plummer block housings for bearings with a cylindrical bore, with standard seals has overall length up to 410 mm.Lock nut, lock washer and locating rings suggested
Double-Lip Seal, Type L. Double-lip L seals are made of thermoplastic elastomer (TPE) and can be used for peripheral speeds of up to 13 m/s (2600 ft/min). In all other aspects, they are the same as...
The SKF Plummer block housings for bearings with a cylindrical bore, with standard seals has overall length up to 320 mm.Lock nut, lock washer and locating rings suggested
Double-Lip Seal, Type L. Double-lip L seals are made of thermoplastic elastomer (TPE) and can be used for peripheral speeds of up to 13 m/s (2600 ft/min). In all other aspects, they are the same as...
Felt Ring Seals Type C. Felt ring seals are simple but efficient seals for use with grease lubrication. They can be operated at peripheral speeds of up to 4 m/s (800 ft/min). The seals can be used ...
The SKF Plummer block housings for bearings with a cylindrical bore, with standard seals has overall length up to 345 mm.Lock nut, lock washer and locating rings suggested
Inside Diameter = 30mm Outside Diameter = 40mm Seal Type = Rotary Shaft Seal Thickness = 4mm Seal Material = Nitrile Rubber Minimum Operating Temperature = -40°C Maximum Operating Temperature = +80°C
Inside Diameter = 25mm Outside Diameter = 35mm Seal Type = Rotary Shaft Seal Thickness = 4mm Seal Material = Nitrile Rubber Minimum Operating Temperature = -40°C Maximum Operating Temperature = +80°C
Inside Diameter = 20mm Outside Diameter = 28mm Seal Type = Rotary Shaft Seal Thickness = 4mm Seal Material = Nitrile Rubber Minimum Operating Temperature = -40°C Maximum Operating Temperature = +80°C
Inside Diameter = 16mm Outside Diameter = 24mm Seal Type = Rotary Shaft Seal Thickness = 3mm Seal Material = Nitrile Rubber Minimum Operating Temperature = -40°C Maximum Operating Temperature = +80°C
Inside Diameter = 12mm Outside Diameter = 19mm Seal Type = Rotary Shaft Seal Thickness = 3mm Seal Material = Nitrile Rubber Minimum Operating Temperature = -40°C Maximum Operating Temperature = +80°C