Cable Grommets (303 artikelen)

Minimum Panel Thickness = 1.02mm Material = Nylon 66 Colour = Black Grommet Strip Length = 100ft

Minimum Panel Thickness = 1.14mm Material = Nylon 66 Colour = Black Grommet Strip Length = 100ft

Minimum Panel Thickness = 1.27mm Material = Nylon 66 Colour = Black Grommet Strip Length = 100ft

Minimum Panel Thickness = 1.27mm Material = Nylon 66 Colour = Black Grommet Strip Length = 100ft

Saves installation time by allowing conduit or pip to be laid in place after the hanger is mounted For use with conduit and pipe

Used to protect the insulation against damage and keep heat loss to a minimum.

Minimum Panel Thickness = 1.14mm Material = Nylon 66 Colour = Natural Grommet Strip Length = 100ft

Grommet Type = Grommet Strip Material = Nylon 66 Colour = Natural Grommet Strip Length = 100ft

DG Feedthrough Bushing. Membrane buffers to mechanically protect cables on sharp-edged housing exits.

DG Feedthrough Bushing. Membrane buffers to mechanically protect cables on sharp-edged housing exits.

DG Feedthrough Bushing. Membrane buffers to mechanically protect cables on sharp-edged housing exits.

DG Feedthrough Bushing. Membrane buffers to mechanically protect cables on sharp-edged housing exits.

DG Feedthrough Bushing. Membrane buffers to mechanically protect cables on sharp-edged housing exits.

DG Feedthrough Bushing. Membrane buffers to mechanically protect cables on sharp-edged housing exits.

DSC Series Nylon Grommet Strips

Allows the entry of pre-assembled cables into a switch cabinet Use of identification strips is possible No special tools required Standard screw driver (5 x 1 mm) necessary to open split hood

Harting Grommets. A range of grommets by Harting that are designed for use with there split hood cable entry boxes. Available in various different sizes

Minimum Panel Thickness = 1.5mm Minimum Cable Diameter = 20.5mm Panel Hole Diameter = 16mm Material = TPE Colour = Grey

Edge protection grommets are used wherever cable and wires are routed through apertures. HellermannTyton grommets offer excellent mechanical protection.

Bend protection grommets are typically used to protect cables and wires at the apertures in casings.

The practical mix of grommets for construction, repairs and home improvement.

Flexiform grommet strips are used to protect cables and wires routed through sharp-edged cutout sections. Edge protection polyamide transparent 0.4-1.3 mm

HellermannTyton Flexiform Edge ProtectorThe HellermannTyton Flexiform Edge protector is a 25mm long gourmet strip. Flexiform G51P is made of natural polyethylene material. It offers general-purpose...

HellermannTyton Flexiform Edge ProtectorThe HellermannTyton Flexiform Edge protector is an 18mm, round grommet. It is made of cadmium-free, flexible PVC that is resistant to various minerals and en...

Flexiform® Protective Profiles. Flexiform® products are universal strain relief gommets that provide a means to demarcate the edge of any opening, regardless of form and dimension. They provide ins...

Grommet Type = Round Minimum Cable Diameter = 5.5mm Maximum Cable Diameter = 6.7mm Material = Nylon 66 Minimum Operating Temperature = -40°C Maximum Operating Temperature = +85°C

Strain relief clips for gripping cables up to 8.5 mm bundle diameter. Strain relief clip is simply attached to mounting surface with an M4 fixing screw.

Wire Sealing Grommet. Wire sealing grommets for extreme environmental conditions and high altitude sealing

Wire Sealing Grommet. Wire sealing grommets for extreme environmental conditions and high altitude sealing

Wire Sealing Grommet. Wire sealing grommets for extreme environmental conditions and high altitude sealing

Wire Sealing Grommet. Wire sealing grommets for extreme environmental conditions and high altitude sealing

Legrand 046480

PVC grommet. Black PVC grommet for walls.

PVC grommet. Black PVC grommet for walls.

PVC grommet. Black PVC grommet for walls.

Minimum Panel Thickness = 2mm Maximum Cable Diameter = 17mm Material = PVC Colour = Black

Minimum Panel Thickness = 1mm Panel Hole Diameter = 6mm Material = PVC Colour = Black

Security of the Push-Pull latching system Watertight connection (IP 68/IP 66) Multipole types 2 to 64 contacts Solder crimp or print (straight or elbow) contacts Keying system («G» key standard) Mu...

Security of the Push-Pull latching system Watertight connection (IP 68/IP 66) Multipole types 2 to 64 contacts Solder crimp or print (straight or elbow) contacts Keying system («G» key standard) Mu...

Straight 2B/3B series plugs. From Lemo, this 2B/3B Series of multipole circular connectors features a push-pull self-latching connector system to ensure a secure mating that is resistant to vibrati...

Lemo Series 0B Strain Relief Boots ; Collets. A range of strain relief boots and collets for use with the Lemo 0B series push-pull connectors. The strain relief boots and collets are available in v...

Lemo Series 0B Strain Relief Boots ; Collets. A range of strain relief boots and collets for use with the Lemo 0B series push-pull connectors. The strain relief boots and collets are available in v...