Non Contact Safety Switches (590 artikelen)

Omron Non-Contact SwitchThe Omron F3S-TGR-N_C series non-contact switch has a switching distance of 17mm and 24VDC supply voltage. This is an elongated sensor type with M12, 8-pin cable connection....

Omron Non-Contact SwitchThe Omron F3S-TGR-N_C series non-contact switch has a switching distance of 12mm and 24VDC supply voltage. This is miniature sensors with 10m pre-wired cable connection. It ...

The ABB Eden series non-contact sensor is used in order to be able to display the status of doors and hatches on a machine. The LED on it indicates if the door is closedExcellent resistance to hars...

The Siemens 3SE6 is a Magnet switch Contact block 26 x 33 mm, for door hinge on the right,It has 1NO+1NC safety Contact elements with 8 mm latching connection.It has ip rating of IP67. Can be insta...

″Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuat...

The Siemens 3SE6 is a Magnet switch Contact block 26 x 33 mm, for door hinge on the left,It has 1 NO+1 NC NC safety Contact elements with 8 mm latching connection Connector.It has ip rating of IP67...

The Omron non-contact door switches has Pigtail with M12 connector. It has 4-pole.It has better stability

EN 1088, EN 60947-5-3, EN 60204-1, ISO 13849-1, EN 62061, EN 954-1, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is prese...

EN 1088, EN 60947-5-3, EN 60204-1, ISO 13849-1, EN 62061, EN 954-1, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is prese...

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Ty...

Supply Voltage = 24V dc Safety Contacts = 1NO Housing Material = Plastic Connection Type = Cable Switch Type = Non Contact Actuator Type = Magnetic Sensor Principle = Magnetic Series = RS IP Rating...

″Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuat...

Supply Voltage = 24V dc Safety Contacts = 1NO Housing Material = Plastic Connection Type = Cable Switch Type = Magnetic Reed Contact Actuator Type = Magnetic Sensor Principle = Magnetic Series = RS...