Non Contact Safety Switches (570 artikelen)

IN4000 Inductive Safety Switch. The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not re...

″Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuat...

OverviewThe IN4000 Standard inductive safety switches are used for determining position and work on a non-contact basis. These safety switches are actuated through metal (e.g., ST37 steel) so that ...

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

Schmersal Non-contact Safety SwitchThe Schmersal BNS33S series non-contact safety switch has a safe switch ON distance ranging between 8mm and switch OFF distance of 18mm. This switch has 1NO and 2...

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

Housing Material = Stainless Steel Connection Type = Cable Switch Type = Magnetic Reed Contact Actuator Type = Magnetic Sensor Principle = Magnetic Series = BNS 40 IP Rating = IP67 Width = 15mm

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

″Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuat...

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

Supply Voltage = 24V dc Safety Contacts = NO/2NC Housing Material = Plastic Connection Type = 10m Cable Actuator Type = Magnetic Series = Eaton Moeller IP Rating = IP67 Width = 15mm