Push Button Tools (42 artikelen)

The EAO mounting tool is used for tightening or loosening of the fixing nut. It has an overall dimension of Ø 16 mm. The tool is made of metal.Light-weight 0.020 kg

Push Button Tools

Mounting Tool. Assembly tool for mounting in tight spaces Lamp replacement tool for bulbs and LEDs

Mounting Tools. Mounting tool used for tightening the sleeve and locking nuts of push buttons from the ABB compact and modular range of pilot devices.

A01 ; A02 Series Tool Kit. Kit consists of fixing nut key and bulb remover

Assembly and disassembly tools for series A01. Assembly and disassembly tools for A01 series pushbuttons.

Assembly and disassembly tools for series A01. Assembly and disassembly tools for A01 series pushbuttons.

KR Series Accessories. End and middle panels housings, which dovetail into each other, enable a side stacked cluster of KR rocker switch cases, to be assembled and positioned into a long panel slot...

Fixing Tool and Lamp Tool. Fixing tool has castellated head to fit the lock nuts on all units to aid tightening The lamp tool is for inserting or removing lamps

Switch supplied without actuator, see stk. no ; 665-528 665-528 etc typically The black/green lens actuator ; 665-556 665-556 is not suitable for use with neon or red LED illuminated switches. Colo...

The EAO 61 series dismantling tool for stop switch.Penetration by dust and liquids is prevented even under the most adverse conditions.

The EAO modular switch tool kits has contain LED remover.Weight -0.003 kg

When replacing the lamp the switch may become actuated. For the EAO 31 series of push button switches see stock number ; 749-2605 749-2605 typically. For the EAO 31 series of indicators see stock n...

EAO Tool Kit, Series 61. The kit is comprised of a lens removal tool for flush mount pushbuttons and indicators, a dismantling tool for switching elements and a mounting tool for tightening (or loo...

The EAO 84 series mounting tool for short emergency-Stop.Penetration by dust and liquids is prevented even under the most adverse conditions.

Kit Includes = Lamp Remover, Lens Remover

Kit Includes = PCB Plug-In Base

Kit Includes = Lamp Remover, Lens Remover

Kit Includes = Mounting Tool

Pushbutton switches series 84. The 84 series pushbuttons have been designed for use in a wide selection of applications. Thanks to its IP67 rating it is perfectly suited to outdoor use or even in h...

IEC 60947-5-5; 6.2, IEC 60947-5-5; 5.2 ; IEC 60947-5-1, UL, c-UL and EN compliant. IDEC X6 Series Emergency E-Stop (unibody type). The IDEC X6 series smooth button design eliminates dust and dirt b...

Fitting Toolkit, 8mm push buttons. Product Description: The Idec fitting tool kit is made up of three component parts required to fit and maintain Idec 8mm sub-miniature push button switches. MT-00...

IDEC’s switches are “;The best engineered switch in the world”; for a reason. Carrying the CE mark, UL, CSA, CCC (Chinese), and TUV approvals, these switches are designed for use in almost any part...

Push Button Tools

The NKK Switches Cap Extractor is made up of Stainless steel.Series HB KB LB UB YB

The NKK Switches 15.11mm Wide Paddle/Black belong to M,P Accessories Series.Series Rocker Accessories Type paddle

The NKK Switches .365”; Wide Paddle is made from Polyamide.Colors C Series: M M2T P

The NKK Switches Lever belongs to M, M2 Accessories Series.Series Accessories Accessories Color Gray

The NKK Switches Lever belongs to M, M2 Accessories Series.Series Accessories Accessories Color Blue

The NKK Switches Lever belongs to M, M2 Accessories Series.Series Accessories Accessories Color Green

The NKK Switches Lever belongs to M, M2 Accessories Series.Series Accessories Accessories Color Red

Kit Includes = Mounting Tool Number of Pieces = 1

This Omron LED lamp extractor, from range A22N,is used to easily remove and attach LED Lamps.It is made up of rubber

Switch Assemblies - A16 Range. Miniature design, the smallest class in the industry The same contacts can be used for both standard loads ; microloads Easy to wire terminal arrangement Detachable s...

The Omron tightening wrench is a pushbutton switch accessory. It is Used to tighten Mounting Nuts from the back of the panel. This product aims Control panel miniaturization through a more compact ...

The EAO lens remover is to be used for flush front bezel. It has flush type design. The EAO lens remover comes in silver colour.Light-weight 0.011 kg For use with Flush Front Bezel or Raised Lenses

LEDtec LED Indicators provide solutions for a wide range of requirements. The standard 22.5mm and 16mm Indicators are available in a variety of colours and are ideal for providing highly reliable i...

IEC 947-1, IEC 947-5-1, IEC 947-5-4, EN 60947-5-1, JIS C 4520 and 852, UL 508, CSA C22-2 n° 14. Tools. Screwdriver features a special tip for mounting contact blocks Fixing nut tightening wrench en...

IEC, JIS. UL, CSA. Tightening Tool. For Style 5 Double Unsulated Heads

IEC 947-1, IEC 947-5-1, IEC 947-5-4, EN 60947-5-1, JIS C 4520 and 852, UL 508, CSA C22-2 n° 14. Tools. Screwdriver features a special tip for mounting contact blocks Fixing nut tightening wrench en...