Pneumatic Manual Control Valves (392 artikelen)

The Festo self-aligning rod coupler compensate for angular and radial misalignment for fitting on piston rod side which size is M5 and used steel material for housing. It has 2- moderate corrosion ...

The Festo self-aligning rod coupler compensate for angular and radial misalignment for fitting on piston rod side which size is M36x2 and used steel material for housing. It has 2- moderate corrosi...

The Festo on-off valve used for service unit with threaded connecting plate which has manual actuator and piston slide of structure. It used operating pressure up to 0 -16 bar and standard nominal ...

The Festo on-off valve has electrical actuator with silencer direction of flow from right to left. It has piston slide of structure and used mechanical spring for reset. It used operating pressure ...

The Festo swivel flange for cylinder ADVU, AEVU which is matching with clevis foot mounting LBN or LN, LSN. It size is 50 and used galvanised steel material for screw with plastic bearing.Ambient t...

The Festo mushroom pushbutton with detent used for basic valve such as SV, SVS, SVOS and has 30.5mm of installation diameter with IP40 class. Its colour is red and used 25N of actuating force.Produ...

The Festo on-off valve has manual actuator with silencer direction of flow from right to left. It has rotary slide valve of structure and has 2 position. It used operating pressure up to 0 -18 bar ...

The Festo HEE series pneumatic on-off valve is manual controllable with monostable, 2/2 closed valve function. It has piston slide of structure for service units, without threaded connection plates...

The Festo HEL series pneumatic on-off valve is equivalent to monostable, 2/2 closed valve function. This is used in conjunction with service units for gradual pressure build-up.Exhaust-air function...

The Festo HEL series pneumatic on-off valve is equivalent to monostable, 2/2 closed valve function. This is used in conjunction with service units for gradual pressure build-up.Exhaust-air function...

The Festo HEL series pneumatic on-off valve is equivalent to monostable, 2/2 closed valve function. This is used in conjunction with service units for gradual pressure build-up.Exhaust-air function...

The Festo HEL series pneumatic on-off valve is equivalent to monostable, 2/2 closed valve function. This is used in conjunction with service units for gradual pressure build-up.Exhaust-air function...

The Festo HEL series pneumatic on-off valve is equivalent to monostable, 2/2 closed valve function. This is used in conjunction with service units for gradual pressure build-up.Exhaust-air function...

Festo Monostable Pneumatic Manual Control Valve, 2/2 Closed - D Series - HEL-1/8-D-MINI This pneumatic on/off valve from Festo protects your air and gas flow systems from damage. It does this by ma...

The Festo HEL series pneumatic on-off valve is equivalent to monostable, 2/2 closed valve function. This is used in conjunction with service units for gradual pressure build-up.Exhaust-air function...

The Festo HEL series pneumatic on-off valve is equivalent to monostable, 2/2 closed valve function. This is used in conjunction with service units for gradual pressure build-up.Exhaust-air function...

The Festo HEL series pneumatic on-off valve is equivalent to monostable, 2/2 closed valve function. This is used in conjunction with service units for gradual pressure build-up.Exhaust-air function...

The Festo push-in connector with tube1 size 6mm and used push/pull principle of structure with nominal size is 2.5mm. It used operating pressure complete temperature range up to -0.95- 16 bar.Ambie...

The Festo hand lever valve used manual actuator with 4/3 exhausted valve function. Its standard nominal flow rate is 3200 l/min and gives operating pressure up to 0 - 10 bar. Its width size is 95mm...

The Festo MS series pneumatic soft-start valve is a slowly pressurise and exhaust equipment with 2/2-way valve function. It has piston seat design structure.Exhaust-air function = throttle able Typ...

The Festo flange mount accessories for ISO 15552 pneumatic cylinder which offer a wide range of versatile mounting option. Its bore size is 125 with steel material of screws.Ambient temperature is ...

The Festo clevis foot used for swivel mounting of cylinder which size is 100 and used 1- moderate corrosion stress.Ambient temperature is -40 to 150 °C Product weight is 1234 g

The Festo mushroom pushbutton used for basic valve such as SV, SVS, SVOS and has 22.5mm of installation diameter with IP40 class. Its colour is black and used 14N of actuating force.Product weight ...

The Festo flange mount accessories for ISO 21287 pneumatic cylinder which offer a wide range of versatile mounting option. Its bore size is 16 with steel material of screws.Ambient temperature is -...

The Festo rod eye with hexagonal nut for spherical swivelling cylinder mounting has size M10 which used steel for housing material and has 1 - low corrosion stress.Ambient temperature -40 - 150 °C,...

The Festo swivel mounting has size of 20/25 and used steel mounting. It has 1 - low corrosion stress.Ambient temperature -40 to 150 °C Product weight 67 g

The Festo swivel flange accessories for ISO 21287 pneumatic cylinder which offer a wide range of versatile mounting option. It size is 63 and used plastic bearing.Ambient temperature -40 to 90 °C P...

Function = 2X3/2, Closed, Monostable Manufacturer Series = SV Model Number p = 184135

The Festo push-in connector with tube size 10mm and used push/pull principle of structure with nominal size is 6.7mm.Ambient temperature -10 to 80 °C PBT used for housing material

The Festo push-in connector with tube size 4mm and used push/pull principle of structure with nominal size is 2.6mm. It used 1 - low corrosion stress.Ambient temperature -10 to 80 °C PBT used for h...

The Festo rod clevis with male thread for swivelling cylinder mounting which size is M10x1.25 with male thread connection. It has 1-low corrosion stress.Ambient temperature is -40 to 150 °C

The Festo on-off valve used for service unit with threaded connecting plate which has manual actuator and piston slide of structure. It used operating pressure up to 0 -16 bar and has a 2 position....

The Festo self-aligning rod coupler compensate for angular and radial misalignment for fitting on piston rod side which size is M5 and used steel material for housing. It has 2- moderate corrosion ...

The Festo push-in connector with tube size 6mm and used push/pull principle of structure with nominal size is 4mm. It used 1 - low corrosion stress.Ambient temperature -10 to 80 °C PBT used for hou...

The Festo MS series pneumatic on-off valve is a slowly pressurise and exhaust equipment with 3/2 bistable valve function. It has piston slide design structure.Type of actuation = manual Exhaust-air...

The Festo swivel flange accessories for ISO 21287 pneumatic cylinder which offer a wide range of versatile mounting option. It size is 100 and used plastic bearing.Ambient temperature -40 to 90 °C ...

The Festo push-in connector with self-sealing has tube size 10mm and used push/pull principle of structure with 20.5mm tubing insertion depth. Its nominal size is 5.3mm.Ambient temperature -10 to 8...

The Festo on-off valve has manual actuator with silencer direction of flow from right to left. It has rotary slide valve of structure and has 2 position. It used operating pressure up to 0 -18 bar ...

The Festo swivel flange accessories for ISO 21287 pneumatic cylinder which offer a wide range of versatile mounting option. It size is 25 and used plastic bearing.Ambient temperature -40 to 90 °C P...

The Festo adapter used for mounting a vacuum suction cup to a hollow cylinder piston rod.Type code is AD

The Festo rod eye with hexagonal nut for spherical swivelling cylinder mounting has size M16 which used steel for housing material and has 1 - low corrosion stress.Ambient temperature -40 - 150 °C,...

The Festo on-off valve has manual actuator with silencer direction of flow from right to left. It has rotary slide valve of structure and has 3 port. It used operating pressure up to 0 -18 bar and ...

The Festo push-in connector with push-in sleeve used with tube1 size 8mm. It used push/pull principle of structure with nominal size is 3.8mm. It used 1 - low corrosion stress.Ambient temperature -...

On-off valve MS4-EM1-1/4 3/2 bistable valve function Standard nominal flow rate of 2,200 I/min G1/4 pneumatic connection Aluminium die case housing

The Festo clevis foot used for swivel mounting of cylinder which size is 32 and used 1- moderate corrosion stress.Ambient temperature is -40 to 150 °C Product weight is 149 g

The Festo push-in connector with tube1 size 8mm and used push/pull principle of structure with nominal size is 4mm. It used 1 - low corrosion stress which has container size is 50.Ambient temperatu...

The Festo HEE series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure for service units, without threaded connection plates...

The Festo on-off valve used for service unit with threaded connecting plate which has manual actuator and piston slide of structure. It used operating pressure up to 0 -16 bar and has a 3 port.Ambi...

Festo 3/2 Closed, Monostable Pneumatic Manual Control Valve - HEE Series - HEE-D-MIDI-24 This closed electrical on/off valve from Festo is used for pressuring and venting pneumatic installations. T...

Festo Manual Control Valve, 3/2 Closed, Monostable - HEE Series - HEE-1/4-D-MINI-24 This Festo manual control valve can regulate the flow of air or gas through your pneumatic system. It has a hand-...

The Festo shut-off valve used manual actuator with 2/2 bistable valve function. It has piston slide of structure and non reversible of flow direction. It gives operating pressure up to -0.95 - 10 b...

Festo 3/2 Closed, Monostable Pneumatic Manual Control Valve - HEE Series - HEE-D-MINI-24 Built for trouble-free operation over the long term, this sturdy manual control valve from Festo withstands ...

The Festo HEE series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure for service units, without threaded connection plates...

The Festo HEE series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure for service units, without threaded connection plates...

The festo non-return valve HB-1/8-QS-4 Flow rate from the QS plug connector to the male thread. It has operating pressure –1 to 10 bar. The operating medium compressed air in accordance with ISO 85...

The festo non-return valve HB-1/2-QS-12 Flow rate from the QS plug connector to the male thread. It has operating pressure –1 to 10 bar. The operating medium compressed air in accordance with ISO 8...

The festo shut-off valve HE-3-3/8-QS-10 valve function=3/2 bistable. It has pneumatic connection, port 1=R3/8 and pneumatic connection, port 2=QS-10.Type of actuation manual Mounting type (* Option...

The Festo retainer GR-H-QS-3-4 For mounting the one-way flow control valves with screws, series GR/GRO-QS-.. Materials note=Free of copper and PTFEMaterials note Free of copper and PTFE

The festo pinch valve VZQA-C-M22U-25-GG-V4V4S1-4 Pneumatically actuated pinch valve in stainless steel. It has safety position open with G thread and DN25.Design structure Pneumatically actuated pi...

The push-in T-fitting NPQM-T-G12-Q12-P10 Attractively priced metal push-in fitting for pneumatic applications with a temperature range up to 70 °C and a pressure range up to 16 bar.Size Standard No...

The festo shut-off valve HE-3-1/8-QS-6 valve function=3/2 bistable. It had pneumatic connection, port 1=R1/8 and pneumatic connection, port 2=QS-6.Type of actuation manual Mounting type (* Optional...

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure used in conjunction with service units. The direction...

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure used in conjunction with service units. The direction...

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure used in conjunction with service units. The direction...

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure used in conjunction with service units. The direction...

The Festo clevis foot used for swivel mounting of cylinder which size is 32 and used 1- moderate corrosion stress.Ambient temperature is -40 to 150 °C Product weight is 20 g

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure used in conjunction with service units. The direction...

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure used in conjunction with service units. The direction...

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure for service units, without threaded connection plates...

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure used in conjunction with service units. The direction...

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure used in conjunction with service units. The direction...

The Festo HEP series pneumatic on-off valve is manual controllable with monostable, 3/2 closed valve function. It has piston slide of structure for service units, without threaded connection plates...

The Festo MS series pneumatic on-off valve is a slowly pressurise and exhaust equipment with monostable, 3/2 closed valve function. It has piston slide design structure.Type of actuation = electric...

The Festo on-off valve used in conjunction with service unit which has piston slide of structure. It used operating pressure up to 2.5 -16 bar.Plug pattern type C

The Festo self-aligning rod coupler compensate for angular and radial misalignment for fitting on piston rod side which size is M16 and used steel material for housing. It has 2- moderate corrosion...

The Festo 2 way ball valve has bras design and used mechanical actuator. Its flow direction is reversible and used 5Nm of breakaway torque at differential pressure.Medium temperature is -20 to 150 °C

The Festo on-off valve used for service unit with threaded connecting plate FRB threaded pin which has electrical actuator and piston slide of structure and mechanical spring for reset purpose. It ...

The Festo push-in connector with tube1 size 4mm and used push/pull principle of structure with nominal size is 3mm. It used operating pressure complete temperature range up to -0.95- 16 bar.Ambient...

The Festo on-off valve has manual actuator with silencer direction of flow from right to left. It has rotary slide valve of structure and has 3 port. It used operating pressure up to 0 -14 bar and ...

The Festo rod eye with hexagonal nut for spherical swivelling cylinder mounting has size M36x2 which used steel for housing material and has 1 - low corrosion stress.Ambient temperature -40 - 150 °...

The Festo on-off valve has manual actuator with silencer direction of flow from right to left. It has rotary slide valve of structure and has a 2 position. It used operating pressure up to 0 -14 ba...

The Festo swivel mounting is suitable for DSNU/ESNU round cylinder and mounting to bearing cap or end cap is permissible which size is 20,25. It used bronze bearing and has 1 - low corrosion stress...

The Festo swivel mounting is suitable for DSNU/ESNU round cylinder and mounting to bearing cap or end cap is permissible which size is 50,63. It used bronze bearing and has 1 - low corrosion stress...

The Festo push-in connector with push-in sleeve used with tube1 size 6mm. It used push/pull principle of structure with nominal size is 2.5mm. It used 1 - low corrosion stress.Ambient temperature -...

The Festo on-off valve used for service unit with threaded connecting plate FRB threaded pin which has electrical actuator and piston slide of structure and mechanical spring for reset purpose. It ...

Festo Pneumatic Manual Control Valve - SV Series - SV-3-M5 This manually operated pneumatic control valve by Festo combines functionality and simplicity. The valve opens immediately when actuated, ...

Function = 3/2 Open, Single Solenoid Manufacturer Series = SO-3 Model Number p = 10403

Connection Port Thread = G 1/4 Function = 3/2 Way Valve, Monostable Thread Size = G 1/4 Thread Standard = G Manufacturer Series = V-3 Model Number p = 6808

Connection Port Thread = Metric M5 Function = 3/2 Way Valve, Monostable Thread Size = M5 Thread Standard = Metric Manufacturer Series = V-3 Model Number p = 3626

Function = 3/2 Way Valve, Monostable Manufacturer Series = V/O Model Number p = 10747

Connection Port Thread = G 1/4 Function = 3/2 Way Valve, Monostable Thread Size = G 1/4 Thread Standard = G Manufacturer Series = VO Model Number p = 9157

Connection Port Thread = G 1/8 Function = 3/2 Way Valve, Monostable Thread Size = G 1/8 Thread Standard = G Manufacturer Series = VOS Model Number p = 2952

Connection Port Thread = G 1/8 Function = 3/2 Way Valve, Monostable Thread Size = G 1/8 Thread Standard = G Manufacturer Series = VS Model Number p = 2334

Function = 3/2 Way, Closed, Monostable Manufacturer Series = S-3 Model Number p = 7843

Function = 3/2-Way, Closed, Monostable Manufacturer Series = SVK Model Number p = 12146

Connection Port Thread = G 1/8 Function = 4/2 Way Valve, Monostable Thread Size = G 1/8 Thread Standard = G Manufacturer Series = VS Model Number p = 3394

Connection Port Thread = G 1/8 Function = 4/2, Monostable Thread Size = G 1/8 Thread Standard = G Manufacturer Series = SVS Model Number p = 10192

The Festo push-in connector for high flow rate used push/pull principle of structure with 16mm of nominal size. Its operating pressure complete temperature range up to 0.95 - 7 bar.Ambient temperat...

The Festo push-in connector with tube1 size 12mm and used push/pull principle of structure with nominal size is 6.7mm. It used 1 - low corrosion stress.Ambient temperature -10 to 80 °C PBT used for...

The Festo swivel flange accessories for ISO 21287 pneumatic cylinder which offer a wide range of versatile mounting option. It size is 12 and used plastic bearing.Ambient temperature -40 to 90 °C P...