Rod Ends | MERCATEO

Afbeelding

Artikelnaam

Fabrikant/nr.

Prijs excl. BTW

Bestellen

Igus M8 Male Igumid G Rod End, 8mm Bore, 55mm Long, Metric Thread Standard, Male Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Male Thread

Igus

KARM-08

vanaf € 4,58*
per stuk

Igus M8 Female Igumid G Rod End, 8mm Bore, 48mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Female Thread

Igus

KBRM-08

vanaf € 5,35*
per stuk

Igus M10 Male Igumid G Rod End, 10mm Bore, 63mm Long, Metric Thread Standard, Male Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Male Thread

Igus

KARM-10

vanaf € 5,74*
per stuk

Igus M10 Female Igumid G Rod End, 10mm Bore, 58mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Female Thread

Igus

KBRM-10

vanaf € 5,83*
per stuk

Igus M10 x 1.25 Female Igumid G Rod End, 10mm Bore, 58mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Female Thread

Igus

KBRM-10 F

vanaf € 5,84*
per stuk

Igus M5 Female Igumid G Rod End, 5mm Bore, 39.5mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

IGUBAL bearings are designed to run with clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Miniature Rod End, Female Thread, Series E. Can...

Igus

EBRM-05

vanaf € 6,10*
per stuk

Igus M12 Male Igumid G Rod End, 12mm Bore, 71mm Long, Metric Thread Standard, Male Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Male Thread

Igus

KARM-12

vanaf € 6,109*
per stuk

Igus M6 Female Igumid G Rod End, 6mm Bore, 40.5mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

Igus

EBRM-06

vanaf € 6,11*
per stuk

Igus M10 Female Igumid G Rod End, 10mm Bore, 57.5mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

Igus

EBRM-10

vanaf € 6,71*
per stuk

Igus M14 Male Igumid G Rod End, 14mm Bore, 79mm Long, Metric Thread Standard, Male Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Male Thread

Igus

KARM-14

vanaf € 6,756*
per stuk

Igus M12 x 1.25 Female Igumid G Rod End, 12mm Bore, 67mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Female Thread

Igus

KBRM-12 F

vanaf € 6,85*
per stuk

Igus M8 Female Igumid G Rod End, 8mm Bore, 48mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

Igus

EBRM-08

vanaf € 7,27*
per stuk

SMC M10 x 1.25 Female Steel Rod End, 10mm Bore, Metric Thread Standard, Female Connection Gender (2 zoekresultaten)

Mountings. SMC C85 pneumatic cylinder foot mounts, available singularly, with one locknut or as a pair. The foot mounts are suitable for use with C85 series single and double-acting C85 pneumatic c...

SMC

KJ10D

vanaf € 7,38*
per stuk

Igus M16 Male Igumid G Rod End, 16mm Bore, 88mm Long, Metric Thread Standard, Male Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Male Thread

Igus

KARM-16

vanaf € 7,69*
per stuk

Igus M14 Female Igumid G Rod End, 14mm Bore, 76mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Female Thread

Igus

KBRM-14

vanaf € 7,70*
per stuk

Igus M12 Female Igumid G Rod End, 12mm Bore, 67mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Female Thread

Igus

KBRM-12

vanaf € 7,95*
per stuk

SMC M6 x 1 Female Rod End, 6mm Bore, Metric Thread Standard, Female Connection Gender (2 zoekresultaten)

SMC

KJ6D

vanaf € 8,14*
per stuk

Igus M6 x 1 Male Stainless Steel Rod End, 6mm Bore, 46mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

igubal® rod ends are corrosion-resistant can be used without problems in harsh environments. In moist or wet environments, they are resistant to weak acids and alkalines. Their resistance to dirt a...

Igus

KARM-S-06-J-EK

vanaf € 8,27*
per stuk

Igus M6 x 1 Male Igumid G Rod End, 6mm Bore, 46mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Igus

KALM-S-06-J-EK

vanaf € 8,28*
per stuk

LDK Carbon Steel Rod End, 5mm Bore, 41mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact surfaces: Steel/Brass

LDK

POS 5

vanaf € 8,412*
per stuk

LDK Carbon Steel Rod End, 5mm Bore, 41mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Male Rod-End 5mm Bore M5 x 0.8 Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact ...

LDK

POS 5L

vanaf € 8,472*
per stuk

LDK Carbon Steel Rod End, 6mm Bore, 45mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact surfaces: Steel/Brass

LDK

POS 6

vanaf € 8,477*
per stuk

LDK Carbon Steel Rod End, 6mm Bore, 45mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Male Rod-End 6mm Bore M6 x 1.0 Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact ...

LDK

POS 6L

vanaf € 8,527*
per stuk

Igus M16 x 1.5 Female Igumid G Rod End, 16mm Bore, 85mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Female Thread

Igus

KBRM-16 F

vanaf € 8,62*
per stuk

SMC M12 x 1.25 Female Steel Rod End, 12mm Bore, Metric Thread Standard, Female Connection Gender (2 zoekresultaten)

CP95 / CP96 - Accessories

SMC

KJ12D

vanaf € 8,62*
per stuk

Igus M16 Female Igumid G Rod End, 16mm Bore, 85mm Long, Metric Thread Standard, Female Connection Gender (3 zoekresultaten)

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing. Female Thread

Igus

KBRM-16

vanaf € 8,63*
per stuk

LDK M8 Female Carbon Steel Rod End, 8mm Bore, 47mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Female Rod-End 8mm Bore M8 x 1.25 Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding conta...

LDK

PHS 8L

vanaf € 8,73*
per stuk

LDK M8 Female Carbon Steel Rod End, 8mm Bore, 47mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact surfaces: Steel/Brass

LDK

PHS 8

vanaf € 8,733*
per stuk

LDK M8 Male Carbon Steel Rod End, 8mm Bore, 53mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact surfaces: Steel/Brass

LDK

POS 8

vanaf € 8,765*
per stuk

LDK M8 Male Carbon Steel Rod End, 8mm Bore, 53mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Male Rod-End 8mm Bore M8 x 1.25 Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Left Hand Threa...

LDK

POS 8L

vanaf € 8,905*
per stuk

SMC KJD M10 Steel Rod End, 32mm Bore, 57mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Connection Size = M10 Bore Size = 32mm Rod End Type = Rod End Material = Steel Overall Length = 57mm Connection Thread Standard = Metric Connection Gender = Female Manufacturer Series = KJD

SMC

00052058

vanaf € 9,547*
per stuk

SMC M4 x 0.7 Female Rod End, 5mm Bore, Metric Thread Standard, Female Connection Gender (4 zoekresultaten)

SMC

KJ4D

vanaf € 9,29*
per stuk

SMC M8 x 1.25 Female Rod End, 8mm Bore, Metric Thread Standard, Female Connection Gender (2 zoekresultaten)

SMC

KJ8D

vanaf € 9,46*
per stuk

LDK M10 Male Carbon Steel Rod End, 10mm Bore, 61mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact surfaces: Steel/Brass

LDK

POS 10

vanaf € 9,769*
per stuk

LDK M10 Female Carbon Steel Rod End, 10mm Bore, 56mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact surfaces: Steel/Brass

LDK

PHS 10

vanaf € 9,775*
per stuk

LDK M10 Female Carbon Steel Rod End, 10mm Bore, 56mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Female Rod-End 10mm Bore M10 x 1.5 Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding cont...

LDK

PHS 10L

vanaf € 11,811*
per stuk

Igus M8 x 1.25 Male Igumid G Rod End, 8mm Bore, 55mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Igus

KALM-S-08-J-EK

vanaf € 11,939*
per stuk

Igus M8 x 1.25 Male Stainless Steel Rod End, 8mm Bore, 55mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Igus

KARM-S-08-J-EK

vanaf € 9,927*
per stuk

Igus M6 x 1 Female Igumid G Rod End, 6mm Bore, 40mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Igus

KCRM-S-06-J-EK

vanaf € 10,061*
per stuk

Igus M6 x 1 Female Igumid G Rod End, 6mm Bore, 40mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Igus

KCLM-S-06-J-EK

vanaf € 10,071*
per stuk

LDK M10 Male Carbon Steel Rod End, 10mm Bore, 61mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Male Rod-End 10mm Bore M10 x 1.5 Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contac...

LDK

POS 10L

vanaf € 10,075*
per stuk

SMC KJD M12 Steel Rod End, 40mm Bore, 66mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Connection Size = M12 Bore Size = 40mm Rod End Type = Rod End Material = Steel Overall Length = 66mm Connection Thread Standard = Metric Connection Gender = Female Manufacturer Series = KJD

SMC

00052066

vanaf € 10,487*
per stuk

LDK M6 Female Carbon Steel Rod End, 6mm Bore, 39mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Female Rod-End 6mm Bore M6 x 1.0 Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: PTFE composite Slidi...

LDK

PHS 6ECL

vanaf € 10,549*
per stuk

LDK M6 Female Carbon Steel Rod End, 6mm Bore, 39mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: PTFE composite Sliding contact surfaces: Steel/PTFE composite

LDK

PHS 6EC

vanaf € 10,569*
per stuk

LDK M12 Female Carbon Steel Rod End, 12mm Bore, 65mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact surfaces: Steel/Brass

LDK

PHS 12

vanaf € 10,661*
per stuk

LDK Carbon Steel Rod End, 6mm Bore, 45mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: PTFE composite Sliding contact surfaces: Steel/PTFE composite

LDK

POS 6EC

vanaf € 10,863*
per stuk

LDK Carbon Steel Rod End, 4.82mm Bore, 34.91mm Long, UNF Thread Standard, Female Connection Gender (1 zoekresultaat)

Female Rod End .190 Bore 10-32 Unf Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated Body: Carbon steel,clear Zinc plated. Rac...

LDK

PHSB3L

vanaf € 10,864*
per stuk

LDK Carbon Steel Rod End, 6mm Bore, 45mm Long, Metric Thread Standard, Male Connection Gender (1 zoekresultaat)

Male Rod-End 6mm Bore M6 x 1.0 Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: PTFE composite Sliding...

LDK

POS 6ECL

vanaf € 10,881*
per stuk

LDK Carbon Steel Rod End, 4.82mm Bore, 34.91mm Long, UNF Thread Standard, Female Connection Gender (1 zoekresultaat)

Ball: AISI 52100 bearing Steel, heat treated, HRC56 min, Precision ground polished hard chromium plated Body: Carbon steel,clear Zinc plated. Race: Brass Sliding contact surfaces: Steel/Brass

LDK

PHSB3

vanaf € 10,904*
per stuk

LDK M12 Female Carbon Steel Rod End, 12mm Bore, 65mm Long, Metric Thread Standard, Female Connection Gender (1 zoekresultaat)

Female Rod-End 12mm Bore M12 x 1.75 Left Hand Thread Ball: AISI 52100 bearing Steel, heat treated, HRC58-64, Precision ground, polished Body: Carbon steel,clear Zinc plated. Race: Brass Sliding con...

LDK

PHS 12L

vanaf € 13,291*
per stuk

Toon: 10 15 20 50 100

Pagina: 1 2 3 4 5 6 7 8 9 10 11 .. 16 >

Rod Ends (783 artikelen)