Subracks (18 artikelen)

The Bopla Subrack for high mechanical load with profile side wall 3 U for backplanes (.Pi) tested according to Federal Railway standard BN 411 002. Its dimensions are 132.5 x 482.6 x 218.24 mm.Prot...

The Bopla Subrack for high mechanical load with profile side wall 3 U for connectors (.12) tested according to Federal Railway standard BN 411 002. Its dimensions are 132.5 x 482.6 x 218.24 mmProte...

The Bopla Subrack with profile side w265.85 x 482.6 x 218.24 mmall 6 U for backplanes (.Pi). Its dimensions are 265.85 x 482.6 x 218.24 mm.Protection class is IP20 Profiles, natural-coloured anodis...

The Bopla Subrack with profile side wall 6 U for connectors (.12). Its dimensions are 265.85 x 482.6 x 218.24 mm.Protection class is IP20 Profiles, natural-coloured anodised aluminium Railway-teste...

Rack Units = 3U Depth = 460mm Material = Aluminium

If a back plane is mounted to the rear horizontal rail, the insulating strips can be used as an intermediate layer. If IEC 60602-3\DIN 41612) connectors are fitted, additional perforated rails have...

If a back plane is mounted to the rear horizontal rail, the insulating strips can be used as an intermediate layer. If IEC 60602-3\DIN 41612) connectors are fitted, additional perforated rails have...

If a back plane is mounted to the rear horizontal rail, the insulating strips can be used as an intermediate layer. If IEC 60602-3\DIN 41612) connectors are fitted, additional perforated rails have...

If a back plane is mounted to the rear horizontal rail, the insulating strips can be used as an intermediate layer. If IEC 60602-3\DIN 41612) connectors are fitted, additional perforated rails have...

Schroff EuropacPRO - Subrekset - monteerbaar aan rek - 3U - 19"

Schroff EuropacPRO - Subrekset - monteerbaar aan rek - 3U - 19"

Schroff EuropacPRO - Subrekset - monteerbaar aan rek - 3U - 19"

IEC 60297-3/DIN 41 494-5. Handles, Cover plates, EMC gasket kit and Chassis plates need to be ordered separately. Basic Assembly. Accommodates PCBs (horizontally) or non-standard components on a ch...

IEC 60297-3/DIN 41 494-5. Handles, Cover plates, EMC gasket kit and Chassis plates need to be ordered separately. Basic Assembly. Accommodates PCBs (horizontally) or non-standard components on a ch...

IEC 60297-3/DIN 41 494-5. Handles, Cover plates, EMC gasket kit and Chassis plates need to be ordered separately. Basic Assembly. Accommodates PCBs (horizontally) or non-standard components on a ch...