PCB Mounting Enclosures (314 artikelen)

Internal Dimensions = 118.8 x 114 x 34.75mm Internal Length = 119 mm Internal Width = 114 mm Internal Height = 35 mm Body Material = Polycarbonate Number of Pins = 24 Series = AIPEX Pin Pitch = 4.2mm

The Amphenol Armor IPX™ Clear Sealed Enclosure provides superior protection for printed circuit boards and electronic control modules in harsh environments and off-road applications, all in a clear...

Internal Dimensions = 118.8 x 114 x 34.75mm Internal Length = 119 mm Internal Width = 114 mm Internal Height = 35 mm Body Material = Polycarbonate Number of Pins = 24 Series = AIPEX Pin Pitch = 4.2mm

The Amphenol Armor IPX™ Clear Sealed Enclosure provides superior protection for printed circuit boards and electronic control modules in harsh environments and off-road applications, all in a clear...

Internal Dimensions = 82.55 x 101.6 x 19mm Internal Length = 83 mm Internal Width = 102 mm Internal Height = 19 mm Body Material = Thermoplastic Number of Pins = 24 Series = AIPXE

Black, PCB Enclosure with Vent Hole

Black, PCB Enclosure without Vent Hole

Internal Dimensions = 82.55 x 101.6 x 19mm Internal Length = 83 mm Internal Width = 102 mm Internal Height = 19 mm Body Material = Thermoplastic Number of Pins = 24 Series = AIPXE

Clear, Ultem®, PCB Enclosure with Vent Hole

Internal Dimensions = 82.55 x 101.6 x 19mm Internal Length = 83 mm Internal Width = 102 mm Internal Height = 19 mm Body Material = Thermoplastic Number of Pins = 24 Series = AIPXE

Internal Dimensions = 82.55 x 101.6 x 19mm Internal Length = 83 mm Internal Width = 102 mm Internal Height = 19 mm Body Material = Thermoplastic Number of Pins = 24 Series = AIPXE

Clear, Ultem®, PCB Enclosure without Vent Hole

For suitable DTM13 Series connector interface see ; 724-2560 724-2560 and range. Deutsch DTM series PCB Enclosures. Deutsch enclosures are suitable for the protection of circuitry interfaced with t...

For suitable DTM13 Series connector interface see ; 724-2560 724-2560 and range. Deutsch DTM series PCB Enclosures. Deutsch enclosures are suitable for the protection of circuitry interfaced with t...

The Hammond 1557B2BK is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The 1557B2BK has rounded c...

The Hammond 1557BA2GY is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557BA2GY has...

The Hammond 1557B2BK is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557B2BK has r...

The Hammond 1557B2GY is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557B2GY has r...

The Hammond 1557DA2BK is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557DA2BK has...

The Hammond 1557DA2GY is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557DA2GY has...

The Hammond 1557D2BK is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557D2BK has r...

The Hammond 1557D2GY is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557D2GY has r...

The Hammond 1557FA2BK is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557FA2BK has...

The Hammond 1557FA2GY is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557FA2GY has...

The Hammond 1557F2BK is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557F2BK has r...

The Hammond 1557F2GY is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557F2GY has r...

The Hammond 1557HA2BK is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557HA2BK has...

The Hammond 1557HA2GY is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557HA2GY has...

The Hammond 1557H2BK is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557H2BK has r...

The Hammond 1557H2GY is ideally suited for mounting printed circuit boards. It can be used either in a table top configuration or two different wall-mount configurations. The Hammond 1557H2GY has r...

Internal Dimensions = 100 x 50 x 25mm Internal Length = 100 mm Internal Width = 50 mm Internal Height = 25 mm Body Material = Polystyrene

Internal Dimensions = 100 x 50 x 40mm Internal Length = 100 mm Internal Width = 50 mm Internal Height = 40 mm Body Material = Polystyrene

Internal Dimensions = 100 x 50 x 40mm Internal Length = 100 mm Internal Width = 50 mm Internal Height = 40 mm Body Material = Polystyrene

Internal Dimensions = 120 x 65 x 40mm Internal Length = 120 mm Internal Width = 65 mm Internal Height = 40 mm Body Material = Polystyrene

Internal Dimensions = 120 x 65 x 40mm Internal Length = 120 mm Internal Width = 65 mm Internal Height = 40 mm Body Material = Polystyrene

Internal Dimensions = 120 x 65 x 65mm Internal Length = 120 mm Internal Width = 65 mm Internal Height = 65 mm Body Material = Polystyrene

Internal Dimensions = 144 x 74 x 50mm Internal Length = 150 mm Internal Width = 80 mm Internal Height = 55 mm Body Material = Polystyrene

Internal Dimensions = 150 x 80 x 55mm Internal Length = 150 mm Internal Width = 80 mm Internal Height = 55 mm Body Material = Polystyrene

Internal Dimensions = 150 x 80 x 80mm Internal Length = 150 mm Internal Width = 110 mm Internal Height = 80 mm Body Material = Polystyrene

Internal Dimensions = 188 x 11 x 100mm Internal Length = 188 mm Internal Width = 110 mm Internal Height = 100 mm Body Material = Polystyrene

Internal Dimensions = 188 x 110 x 120mm Internal Length = 188 mm Internal Width = 110 mm Internal Height = 120 mm Body Material = Polystyrene

Internal Dimensions = 188 x 110 x 60mm Internal Length = 188 mm Internal Width = 110 mm Internal Height = 60 mm Body Material = Polystyrene

Internal Dimensions = 188 x 110 x 70mm Internal Length = 188 mm Internal Width = 110 mm Internal Height = 70 mm Body Material = Polystyrene

Internal Dimensions = 188 x 110 x 70mm Internal Length = 188 mm Internal Width = 110 mm Internal Height = 70 mm Body Material = Polystyrene

Internal Dimensions = 65 x 50 x 30mm Internal Length = 65 mm Internal Width = 50 mm Internal Height = 30 mm Body Material = Polystyrene

Internal Dimensions = 65 x 50 x45mm Internal Length = 65 mm Internal Width = 50 mm Internal Height = 45 mm Body Material = Polystyrene

Series = E003

Series = E005

Series = E005

Series = E005

Internal Dimensions = 82 x 50 x 26mm Internal Length = 82 mm Internal Width = 50 mm Internal Height = 26 mm Body Material = Tin Plated Steel

PCB Mounting Enclosures

PCB Mounting Enclosures

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

PCMC Series PCB Mounting Cans. A cost effective range of single piece PCB mounting Cans, providing good attenuation for applications where board level RFI/EMI screening is required. Bright Acid Tin...

PCMC Series PCB Mounting Cans. A cost effective range of single piece PCB mounting Cans, providing good attenuation for applications where board level RFI/EMI screening is required. Bright Acid Tin...

PCMC Series PCB Mounting Cans. A cost effective range of single piece PCB mounting Cans, providing good attenuation for applications where board level RFI/EMI screening is required. Bright Acid Tin...

PCMC Series PCB Mounting Cans. A cost effective range of single piece PCB mounting Cans, providing good attenuation for applications where board level RFI/EMI screening is required. Bright Acid Tin...

PCMC Series PCB Mounting Cans. A cost effective range of single piece PCB mounting Cans, providing good attenuation for applications where board level RFI/EMI screening is required. Bright Acid Tin...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

Screening Enclosures. These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequen...

EMI / RFI shielding housings. A range of housings designed for applications that require EMI / RFI shielding, for low and high frequencies. Three versions are available:- standard shielded housing ...

EMI / RFI shielding housings. A range of housings designed for applications that require EMI / RFI shielding, for low and high frequencies. Three versions are available:- standard shielded housing ...

EMI / RFI shielding housings. A range of housings designed for applications that require EMI / RFI shielding, for low and high frequencies. Three versions are available:- standard shielded housing ...

EMI / RFI shielding housings. A range of housings designed for applications that require EMI / RFI shielding, for low and high frequencies. Three versions are available:- standard shielded housing ...

EMI / RFI shielding housings. A range of housings designed for applications that require EMI / RFI shielding, for low and high frequencies. Three versions are available:- standard shielded housing ...

EMI / RFI shielding housings. A range of housings designed for applications that require EMI / RFI shielding, for low and high frequencies. Three versions are available:- standard shielded housing ...

EMI / RFI shielding housings. A range of housings designed for applications that require EMI / RFI shielding, for low and high frequencies. Three versions are available:- standard shielded housing ...

EMI / RFI shielding housings. A range of housings designed for applications that require EMI / RFI shielding, for low and high frequencies. Three versions are available:- standard shielded housing ...

Profielbehuizing, lengte: 150 mm, onderdeel, kleur: aluminiumkleurig, breedte: 74 mm, hoogte: 32,8 mm

Profielbehuizing, lengte: 200 mm, onderdeel, kleur: aluminiumkleurig, breedte: 74 mm, hoogte: 32,8 mm

Profielbehuizing, lengte: 1000 mm, onderdeel, kleur: aluminiumkleurig, breedte: 74 mm, hoogte: 32,8 mm

Profielbehuizing, wandmontage (optioneel met toebehoren), Aluminiumprofiel, 2-delig, kleur: grafietgrijs (7024), profielbreedte (binnenzijde): 78 mm, profielbreedte (buitenzijde): 98,5 mm, lengte: ...

Profielbehuizing, lengte: 150 mm, onderdeel, kleur: aluminiumkleurig, breedte: 98,5 mm, hoogte: 32,8 mm

Profielbehuizing, lengte: 200 mm, onderdeel, kleur: aluminiumkleurig, breedte: 98,5 mm, hoogte: 32,8 mm

Profielbehuizing, lengte: 1000 mm, onderdeel, kleur: aluminiumkleurig, breedte: 98,5 mm, hoogte: 32,8 mm

Profielbehuizing, lengte: 150 mm, onderdeel, kleur: aluminiumkleurig, breedte: 121 mm, hoogte: 32,8 mm

Profielbehuizing, lengte: 200 mm, onderdeel, kleur: aluminiumkleurig, breedte: 121 mm, hoogte: 32,8 mm

Profielbehuizing, lengte: 1000 mm, onderdeel, kleur: aluminiumkleurig, breedte: 121 mm, hoogte: 32,8 mm

Profielbehuizing, lengte: 150 mm, onderdeel, kleur: aluminiumkleurig, breedte: 187 mm, hoogte: 54,6 mm

Profielbehuizing, lengte: 200 mm, onderdeel, kleur: aluminiumkleurig, breedte: 187 mm, hoogte: 54,6 mm

Profielbehuizing, lengte: 1000 mm, onderdeel, kleur: aluminiumkleurig, breedte: 187 mm, hoogte: 54,6 mm

DIN-railbehuizing, 3U, Behuizingafdekkap, breedte: 18,9 mm, hoogte: 32,8 mm, kleur: lichtgrijs (7035)

DIN-railbehuizing, 5U, Behuizingafdekkap, breedte: 18,9 mm, hoogte: 54,8 mm, kleur: lichtgrijs (7035)

DIN-railbehuizing, 6U, Behuizingafdekkap, breedte: 18,9 mm, hoogte: 65,8 mm, kleur: lichtgrijs (7035)

DIN-railbehuizing, 9U, Behuizingafdekkap, breedte: 18,9 mm, hoogte: 98,8 mm, kleur: lichtgrijs (7035)

DIN-railbehuizing, Behuizingsset, breedte: 22,6 mm, kleur: lichtgrijs (7035)

DIN-railbehuizing, 2U voor markeringsdeksel, Behuizingafdekkap, breedte: 18,9 mm, Hoogte: 21,9 mm, diepte: 26 mm, kleur: lichtgrijs (7035)

DIN-railbehuizing, 2U voor markeringsdeksel, Behuizingafdekkap, breedte: 18,9 mm, hoogte: 21,9 mm, kleur: lichtgrijs (7035)

DIN-railbehuizing, 10U, Behuizingafdekkap, breedte: 75,87 mm, hoogte: 109,8 mm, kleur: lichtgrijs (7035)

DIN-railbehuizing, 2U voor markeringsdeksel, Behuizingafdekkap, breedte: 18,9 mm, hoogte: 21,9 mm, kleur: lichtgrijs (7035)