If power is being distributed and controlled from a fixed installation, it may be more appropriate to mount products into an enclosure. For chassis mounting (screwed) see stock nos. ; 478-7672 478-...
If power is being distributed and controlled from a fixed installation, it may be more appropriate to mount products into an enclosure. For chassis mounting (screwed) see stock nos. ; 478-7672 478-...
Accessory Type = Sealing Cap Gender = Female Pole Format = 2 + PE IP Rating = IP65 For Use With = HPT-3-FD and HPT-3-FDW Power Connectors Colour = Black
Accessory Type = Sealing Cap Gender = Female Pole Format = 2 + PE IP Rating = IP65 For Use With = HPT-3-FD and HPT-3-FDW Power Connectors Colour = Black
ABB Connectors Accessories. A range of accessories for use with the Easy and Safe, Tough and Safe and Critical and safe range of industrial connectors.
Bals Quick Connect Socket with Multi-Grip IP67. Bals cable mount sockets with Quick-Connect screwless connection and Multi-Grip cable gland system. The cable mount sockets offer IP67 protection in ...
The Bulgin fuse holder is designed to give the degree of protection demanded in today’s sophisticated electronic equipment. It comes with PC2 protection category.Screwdriver slot knob Low profile b...
The Bulgin insulation boot are designed for IEC connectors. It has PVC insulation.Protects rear of connector Protects against accidental electric shock
Accessories. Professional range of accessories for the Bulgin Buccaneer connectors. Accessories include various crimp tools, sealing caps, cable glands and insulation boots
IEC Connector Insulating Boots. A comprehensive offering of IEC connector insulating boots, offered in a variety of size, designed to assist in preventing accidental shorting of the contacts at the...
IEC Connector Insulating Boots. A comprehensive offering of IEC connector insulating boots, offered in a variety of size, designed to assist in preventing accidental shorting of the contacts at the...
hardware to fit chassis mounted plugs and sockets. All of these plugs and sockets have a contact resistance of ;10mΩ, and an insulation resistance of >10 ;sup>3 ;/sup>MΩ. Their operating temperatur...
hardware to fit chassis mounted plugs and sockets. All of these plugs and sockets have a contact resistance of ;10mΩ, and an insulation resistance of >10 ;sup>3 ;/sup>MΩ. Their operating temperatur...
Bulgin Retaining Clamp Kit The Bulgin retaining clip is designed to prevent accidental removal of the connector. This clip is made from stainless steel material which prevents inadvertent disconnec...
A form bases for GDM series. GDM series male bases, version 3 + E. Contact layout as per DIN 43650 A. GSP 311 model is intended for panel mounting. Seals for GSA model available separately.
Hirschmann flat seals for chassis plugs can be used with DIN Universal Connectors, MIL Universal Connectors, MIL-C-5015 Connectors, VG 95342 Connectors. Its made of NBR (nitrile rubber) , and will ...
Hirschmann flat seals for chassis plugs can be used with DIN Universal Connectors, MIL Universal Connectors, MIL-C-5015 Connectors, VG 95342 Connectors. Its made of NBR (nitrile rubber) , and will ...
GM/GMN series - B form bases. GM and GMN series male bases, version 2+T. The GSA version is to industrial standard (11 mm between contacts), whereas the contact layout on the GSN version conforms t...
UL recognised component, CSA certified, VDE. These connectors are only suitable for power coupling to a fixing point or item of plant, or for internal wiring of equipment. GDME Series. 2P+E
UL recognised component, CSA certified, VDE. These connectors are only suitable for power coupling to a fixing point or item of plant, or for internal wiring of equipment. GDME Series. 2P+E
UL recognised component, CSA certified, VDE. These connectors are only suitable for power coupling to a fixing point or item of plant, or for internal wiring of equipment. GDME Series. 2P+E