Plastic Rods (216 artikelen)

RS PRO V7

Polypropylene Beige/Grey. Low density combined with hardness, stiffness, tensile strength and fatigue resistance Good chemical resistance Typically used for plugs, pallets, filter parts, pump parts...

Nylon 66

Grey PVC Plastic Stock. Good mechanical strength Resistant to most chemicals Easily fabricated and machined Uses include: chemical plant-tanks, electrical components, valves and pumps Maximum servi...

PTFE (Extruded)

RS PRO Black Nylon Rod, 1 m x 50 mm DiameterHard-wearing and versatile, this nylon rod from our RS PRO range is suitable for use in rugged environments. It can withstand most weather conditions and...

Acrylic Sheet ; Rod. High chemical resistance thermoplastic, available in either cast or extruded types. Cast Acrylic. Surface quality achieved by casting against glass 92% Light transmission Excel...

RS PRO V7

RS PRO Opaque Fluoroplastics PTFE Rod, 500 mm x 40 mm DiameterThis opaque fluoroplastics PTFE (polytetrafluoroethylene) rod from RS PRO measures 500 mm in length and 40 mm in diameter. Its useful f...

Polyethylene has poor resistance to hot water, and exposure to UV light will result in gradual decomposition. High Density Polyethylene (HDPE). Used in mechanical/electrical/general engineering, tr...

RS PRO V7

Cast Nylon 6 - MoS ;sub>2 ;/sub> Filled, PA sheet : Polyamide. Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical stre...

RS PRO Molybdenum Disulphide filled Nylon 66 Rod. A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures ...

Carp: EN60893 type PF CC 305, Whale: EN60893 type PF CC 203. Tufnol®, Carp ; Whale Brand. SRBF Sheet : Synthetic Resin Bonded Fabric. Carp brand (fine weave). A laminate plastic based on a fine wea...

Colour = Natural Length = 500mm Material = Nylon Form = Rod Rod Diameter = 80mm Density = 1.15g/cm³ Tensile Strength = 60 (Wet) MPa, 85 (Dry) MPa Flammability Rating = UL 94 HB°C Melting Point = +2...