Data Acquisition Accessories (200 artikelen)

PCI EXpress card proVides an industrY standard 25 pin LPT port.

Accessory Type = Thermocouple For Use With = TC-32

Accessory Type = Channel Expansion Module For Use With = TC-32

Accessory Type = Channel Expansion Module For Use With = USB-2416-2AO

Accessory Type = Termination Board For Use With = USB-2600

Accessory Type = Connector Set For Use With = Easy E4 Logic Module

Fluke CableThe Fluke USB interface Cable has a length of 1.5m for Models 43, 43B, 120, 190 and 430 series. This cable is an interface to connect the optically-isolated serial interface port of a Sc...

Receiver Lambda/4-antenna. Wtrans T01 — Receiver for resistance thermometers. For mobile and stationary temperature measurements Measurement range from -30 °C → +260 °C Wireless measurement value r...

Keithley 3721 Dual 1x20 Multiplexer. The Keithley 3721 offers 2 independent banks of 1x20 two-pole multiplexers for general purpose switching, including temperature measurements. Its analog backpla...

Keithley 7707 32-channel Digital I/O Module. The Keithley 7707 32-channel Digital I/O Module offers 10 channels of 2-pole or 5 channels of 4-pole multilexer switching that can be configured as 2 in...

Keithley 7708 40-channel Differential Multiplexer Module. The Keithley 7708 40-channel Differential Multiplexer Module offers 40 channels of 2-pole or 20 channels of 4-pole multiplexer switching th...

Keithley 7709 6x6 Matrix Module. The Keithley 7709 6x6 Matrix Module is a plug-in module which can connect any combination of 6 differential channels of instrumentation to any combination of 8 diff...

Keithley 7706 All-in-one I/O Module. The Keithley 7706 All-in-one I/O Module offers 20 channels of 2-pole or 10 channels of 4-pole multiplexer switching with built-in automatic CJC sensors, togethe...

Mating connectors (2) with solder cup (Model 7788). Keithley 7703 32-channel High Speed Differential Multiplexer Module. The Keithley 7703 plug-in module offers 32 channels of 2-pole multiplexer sw...

Mating connectors (2) with solder cup (Model 7788). Keithley 7705 40-channel Single-pole Control Module. The Keithley 7705 plug-in module offers 40 channels of independent switching. These channels...

Keithley 7710 20-channel Solid-state Differential Multiplexer. The Keithley 7710 20-channel Solid-state Differential Multiplexer is a plug-in module which offers 20 channels of 2-pole or 10 channel...

Keithley Single Fixed Rack Mount Kit 4288-1. Keithley single fixed rack mount kit 4288-1 for use with Keithley Instruments models 428, 486, 487, 776, 2700, 2000 Series, 2182, 2300 Series, 2500 Seri...

Keithley Dual Fixed Rack Mount Kit 4288-2. Keithley dual fixed rack mount kit 4288-2 for use with Keithley Instruments models 428, 486, 487, 776, 2000 Series, 2182, 2300 Series, 2400 Series, 6514, ...

Accessory Type = High Density Multiplexer Card For Use With = Keithley Multimeters and Oscilloscopes

Accessory Type = High Density Matrix Card For Use With = Keithley Multimeters and Oscilloscopes

Accessory Type = Differential Multiplexer Module For Use With = Keithley Multimeters and Oscilloscopes

Keithley 7702 40 Channel Differential Multiplexer Module. Keithley's 7702 plug-in module, featuring 40 channels of 2 pole or 20 channels of 4 pole multiplexer switching has the ability to be config...

Keithley 7700 20 Channel Differential Multiplexer Module. Keithley's 7700 plug-in module, featuring 20 channels of 2 pole or 10 channels of 4 pole multiplexer switching has the ability to be config...

Accessory Type = Rack Mount Kit

Accessory Type = Dual Flange Kit

Accessory Type = Lock Link Kit For Use With = Data Acquisition Systems and Function Generators

Accessory Type = BNC to 2 Wires For Use With = USB Data Acquisition

The Keysight 34945A switch/attenuator driver module for the 34980A Multifunction Switch/Measure Unit allows you to control switches and attenuators external to the 34980A Mainframe. This module pro...

The Keysight Technologies 6-to-16 pin cable kit for 1150A/51A/52A/53A/54A/55A.Supplies to build 2 cables

The Keysight Y1134A is a row expansion cable for the 34934C configuration block and 34934T terminal block. It allows easy expansion of the matrix rows to additional modules so that a larger matrix ...

Y1135A 1.5 m 50-pin D-sub CableM/F twisted pair with outer shield cable – 300 V Cables are used for direct cable connection to module. Some modules require 2 cables.Features and Benefits- Cable Len...

M/F twisted pair with outer shield cable – 300 V Cables are used for direct cable connection to module. Some modules require 2 cables

Y1137A 1.5 m 78-pin Dsub CableThe 78-pin Dsub male to female cable assembly is 1.5m long. It is constructed from twisted pair cable with an outer shield. The Y1137A 300V cable is used for direct co...

Y1138A 3 m 78-pin Dsub CableM/F twisted pair with outer shield cable – 300 V Cables are used for direct cable connection to module. Some modules require 2 cables.Features and Benefits- Cable Length...

Accessory Type = Data Cable For Use With = USB-IR Multimeter

The Keysight Technologies 9-to-10 pin cable kit for Y1150A, Y1152A, Y1154A.Supplies to build 4 cables

The Keysight Technologies 10-to-10/10-to-14 pin cable kit for Y1153A, Y1154A.Supplies to build 2 cables

34131A Hard Carrying (Transit) Case. The Keysight 34131A is a heavy-duty hard cover carrying case constructed from rugged ABS and has a rubber-grip, steel handles and steel latches. Extra storage b...

This configuration block provides flexible options for wiring rows and columns to D- Sub connectors. Configuration block 34934C-001 can be used to create 4x128 1-wire or 4x64 2-wire matrices. Confi...

Used for 34951, 34952 – 50-pin Dsub male – 125 V. Connector Kit is used to build custom cables.

The Keysight 34938A is a high power general-purpose switch module for the 34980A Multifunction Switch/Measure Unit. It has 20 independent single-pole, single-throw (SPST) 5A relays. This module is ...

The Keysight 34959A module for the 34980A Multifunction Switch/Measure Unit can be used to create custom designs inside the Mainframe. You can control your circuits with access to both the +12V and...

Keysight Technologies MultiplexerThe Keysight Technologies data acquisition 40 channel multiplexer is a single-ended multiplexer module. It is ideal for common applications such as battery test, co...

The Keysight Technologies 34945EXT distribution board with generic screw terminals for driving 16 switch coils.The distribution boards plug onto the 34945EXT, routes the power and control signals f...

The Keysight 34952T is a terminal block for the 34952A and L4452A Multifunction with 32-bit DIO, 2-ch D/A and Totalizer. This terminal block is used for discrete wiring. It supports up to 20 AWG wi...

The Keysight 34942A RF multiplexer module for the 34980A Multifunction Switch/Measure Unit offers bi-directional switching broadband signals. High channel isolation ensures quality dynamic range me...

Keysight Technologies MultiplexerThe Keysight Technologies data acquisition 20 channel multiplexer is a module divided into two banks of 10. Each channel has a 2-wire connection. All 20 channels sw...

Keysight Technologies MultiplexerThe Keysight Technologies data acquisition 20 channel multiplexer is the most versatile multiplexer for industrial purpose scanning. It combines dense, multi-functi...

34945EXT Extender board for 34945A and L4445A, one required for each 64 coils.

Used for 34921/23/25/31/32/33/37/38 –50-pin Dsub female – 125 V. Connector Kit is used to build custom cables.

34921T Terminal Block for 34921A and L4421A MultiplexerThe Keysight 34921T is a terminal block for the 34921A 40-channel multiplexer and the L4421A 40-Channel LXI armature multiplexer. It offers a ...

Used for 34922, 34924 – 78-pin Dsub female – 60 V. Connector Kit is used to build custom cables.

″The Keysight 34925T is a terminal block for the 34925A 40/80-channel FET multiplexer. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connectio...

The Keysight 34931T is a terminal block for the 34931A dual 4x8 armature matrix. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connections or ...

The Keysight 34932T is a terminal block for the 34932A dual 4x16 armature matrix. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connections or...

The Keysight 34933T is a terminal block for the 34933A 4x8 Matrix and the L4433A 4x8 Matrix. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 con...

This terminal block is used for discrete wiring. A fully loaded terminal blocks supports up to 20 AWG wire size typical or 24 AWG if all 144 lines are used. Terminal block 34934T-001 can be used fo...

34937T Terminal Block for 34937A and L4437A GP SwitchThe Keysight 34937T is a terminal block for the 34937A and L4437A GP Switch. This terminal block is used for discrete wiring. It supports up to ...

The Keysight 34938T is a terminal block for the 34938A 20-Channel 5 Amp Form A Switch. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connectio...

Used for the 34950A – 78-pin Dsub male – 60 V. Connector Kit is used to build custom cables.

The Keysight 34950T is a terminal block for the 34950A and L4450A 64-bit digital I/O. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connection...

The Keysight 34951T is a terminal block for the 34951A and L4451A 4-Ch isolated D/A converter. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 c...

The Keysight 34946A microwave switch for the 34980A Multifunction Switch/Measure Unit offers bi-directional switching for test signals from DC to 26.5 GHz. These switches provide excellent insertio...

The Keysight Technologies 34945EXT distribution board for two 84904/5/6/7/8 or 8494/5/6 step attenuators.The distribution boards plug onto the 34945EXT, routes the power and control signals from th...

The Keysight Technologies 34945EXT distribution board for one 87204x/206x or 87606B switch and two N181x switches.The distribution boards plug onto the 34945EXT, routes the power and control signal...

The Keysight Technologies 34945EXT distribution board for two 87222, L7222C transfer switches and six N181x SPDT switches.The distribution boards plug onto the 34945EXT, routes the power and contro...

Keysight Technologies MultiplexerThe Keysight Technologies data acquisition 16 channel multiplexer is the most versatile multiplexer for industrial purpose scanning. The reed relays achieve scan ra...

Keysight Technologies MultiplexerThe Keysight Technologies data acquisition dual four-channel RF multiplexer module that provides the most flexible connection path between the device under test and...

The Keysight 34950A module for the 34980A Multifunction Switch/Measure Unit has 64 bi-directional lines configured as eight 8-bit channels. Each 8-bit channel has programmable polarity and threshol...

The Keysight 34951A module for the 34980A Multifunction Switch/Measure Unit has four electronically calibrated analog channels that can output up to +/-16V DC or +/-20mA DC with 16 bits of resoluti...

The Keysight 34923T is a terminal block for the 34923A 40/80-channel reed multiplexer. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connectio...

This terminal block is used for discrete wiring. A fully loaded terminal blocks supports up to 20 AWG wire size typical and 18 AWG max. This terminal block has screw terminal connections.

34921A 40-Channel Armature Multiplexer for 34980AThe Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has l...

The Keysight 34925A module for the 34980A Multifunction Switch/Measure Unit is a high speed multiplexer that uses long-life, solid-state relays. The high-speed FET relays scan up to 1000 channels-p...

The Keysight 34932A module for the 34980A Multifunction Switch/Measure Unit offers the highest density matrix with connection paths between your device under test and your test equipment. This allo...

The Keysight 34934A module for the 34980A Multifunction Switch/Measure Unit offers the highest density matrix for connecting paths between your device under test and your test equipment, allowing f...

The Keysight 34941A RF multiplexer module for the 34980A Multifunction Switch/Measure Unit offers bi-directional switching for test signals from DC to 3 GHz. High channel isolation ensures quality ...

Keysight Technologies MultiplexerThe Keysight Technologies data acquisition 2-wire matrix module that provides the most flexible connection path between a device under test and the test equipment, ...

Keysight Technologies Data Acquisition Multi-functional ModuleThe Keysight Technologies data acquisition multi-functional module is a module that provides great flexibility for a variety of sense a...

Keysight DAQ970A 4 Channel Digitizer Module The Keysight DAQM909A is a four-channel digitizer module capable of providing four simultaneously-sampled channels with sampling rate as high as 800k sam...

The Keysight Technologies 34945EXT distribution board for 8 N181x SPDT switches.The distribution boards plug onto the 34945EXT, routes the power and control signals from the driver module to the sw...

Accessory Type = PCI GPIB Interface Card For Use With = PC

Accessory Type = BenchVue Data Acquisition Control & Analysis App For Use With = BV0006B

Accessory Type = BenchVue Data Acquisition Control & Analysis App For Use With = BV0006B

The Keysight 34922T is a terminal block for the 34922A 70-channel armature multiplexer. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connecti...

The Keysight 34924T is a terminal block for the 34924A 70-channel reed multiplexer. This terminal block is used for discrete wiring. It supports up to 20 AWG wire size typical for <100 connections ...

34922A 70-Channel Armature Multiplexer for 34980AThe Keysight 34922A module for the 34980A Multifunction Switch/Measure Unit offers high density multiplexer switching in a compact size. It combines...

The Keysight 34923A module for the 34980A Multifunction Switch/Measure Unit is a high speed-multiplexer for general purpose scanning. It uses reed relays to achieve scan rates up to 500 channels-pe...

The Keysight 34924A module for the 34980A Multifunction Switch/Measure Unit is a high-density, high-speed multiplexer for general purpose scanning. It uses reed relays to achieve scan rates up to 5...

The Keysight 34931A module for the 34980A Multifunction Switch/Measure Unit gives you the most flexible connection path between your device under test and your test equipment, allowing different in...

The Keysight 34933A module for the 34980A Multifunction Switch/Measure Unit gives you the most flexible connection path between your device under test and your test equipment, allowing different in...

Keysight Technologies 34937A Data Acquisition Terminal BlockThe Keysight 34937A is a general-purpose switch module for the 34980A Multifunction Switch/Measure Unit. It has 28 independent single-pol...

The Keysight 34939A is a high density general-purpose switch module for the 34980A Multifunction Switch/Measure Unit. It has 64 independent single-pole, single-throw (SPST) relays that can switch 1...

The Keysight 34952A module for the 34980A Multifunction Switch/Measure Unit allows great flexibility for a variety of sense and control applications.It combines the following on a single earth-refe...

Keysight Technologies MultiplexerThe Keysight Technologies data acquisition 20 channel multiplexer is a general-purpose switch module that has 20 independent 1-pole, double-throw (SPDT Form C) latc...

Accessory Type = USB/GPIB Interface For Use With = 34401A Series

The Keysight 34947A microwave switch for the 34980A Multifunction Switch/Measure Unit offers bi-directional switching for test signals from DC to 26.5 GHz. These switches provide excellent insertio...