Voltage Testers (17 artikelen)

EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011. Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead termi...

EN 61243-3 Ed.2009, EN 61243-3 Ed.2010, DIN VDE 0682-401 Ed.2011. Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead termi...

C.A 745N tester, 1 set of black/red extra-fine CAT III / CAT IV test probes, 2 x 1.5 V AAA / LR3 alkaline batteries and 1 user manual in 5 languages. Chauvin Arnoux Voltage and Continuity Tester C....

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both m...

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both m...

IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV. Voltage absence tester, User's guide in 5 languages, 2 x 1.5 V LR03/AAA batteries, 1 set of IP2X removable test probes Ø 4 mm and 1 Velc...

IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV. Voltage absence tester, User's guide in 5 languages, 2 x 1.5 V LR03/AAA batteries, 1 set of removable test probes Ø 2 mm with crystal sa...

IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV. Voltage absence tester, User's guide in 5 languages, 2 x 1.5 V LR03/AAA batteries, 1 set of IP2X removable test probes Ø 4 mm and 1 Velc...

IEC 61243-3:2009, EN 61243-3:2010, IEC 61010 1,000 V CAT IV. Voltage absence tester, User's guide in 5 languages, 2 x 1.5 V LR03/AAA batteries, 1 set of removable test probes Ø 2 mm with crystal sa...

The Multimetrix VT 12 phase tester is the ideal tool for non-contact phase detection. It includes an LED flashlight with high light intensity to ensure good visibility when measuring. The VT 12 is ...

Chauvin Arnoux Voltage and Continuity Tester with LEDs - TX0001-Z. Chauvin Arnoux TX0001-Z Voltage and continuity tester allow you to control AC and DC voltages. The Phase tracking system with audi...

The Sibille voltage detector is designed for proving dead, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 3 to 10 kV. This device will detect ...

The Sibille voltage detector is designed for proving dead, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 10 to 36 kV. The device will detect ...

Maximum Voltage = 1000V ac/dc Continuity Check = Yes Safety Category = CAT IV 1000V Display Type = LED Model Number p = TAG780RIFE

Maximum Voltage = 1000V ac Safety Category = CAT IV 1000V Display Type = LED Model Number p = UNITAGUFE