Extender Boards & Adapter Boards (29 artikelen)

Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels). 64-Way Standard Extender...

Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels). 64-Way Standard Extender...

Extensions with metal holes. This range of PTH extension boards is available in two combinations: standard and super. The standard 64 // 64 range is assembled with a DIN connector (front and back),...

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

RS PRO V10

Type = Extension Board Connection = RS485

RS PRO 10

Eurocard extensions. Range of extensions for testing single- or double-height Eurocards, depth 160 or 220 mm, with type B or C DIN 41612 connectors. The ejector mechanism situated at the front supp...

USB connector conversion board CK-36FeaturesA pin header is included for convenient connection to the main board. There is approximately 5mm from the rear end of the connector to the take-out land,...

Micro-USB Micro-AB connector is converted to 2.54mm pitch. The connector is already mounted.A pin header is included for convenient connection to the main board. There is approximately 5mm from the...

Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 30.48 x 24.13 x 1.6mm FR Material Grade = CEM3 Length = 30.48mm Thickness = 1.6mm Width = 24.13mm

Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 25.4 x 24.13 x 1.6mm FR Material Grade = CEM3 Length = 25.4mm Thickness = 1.6mm Width = 24.13mm

Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 27.94 x 17.78 x 1.6mm FR Material Grade = CEM3 Length = 27.94mm Thickness = 1.6mm Width = 17.78mm

Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 22.86 x 22.86 x 1.0mm FR Material Grade = CEM3 Length = 22.86mm Thickness = 1mm Width = 22.86mm

Type = Conversion Board Base Material = Epoxy Glass Fabric Laminate Number of Sides = 2 Dimensions = 38.36 x 22.86 x 0.8mm FR Material Grade = FR4 Length = 38.36mm Thickness = 0.8mm Width = 22.86mm...

Type = DIP adapter evaluation module Number of Sides = 1

Self-Adhesive Contact Strips. These self-adhesive PCB contact strips from Roth Elektronik are available in a range of pitches with the following features:. Pre-scratched break point One-sided Witho...

SSOP Adaptor Boards, RE931. RE931 is offered as a board of 7 individual components parts (RE931-01, RES931-02, RE931-03, RE931-04, RE931-05, RE931-06, RE931-07). It features a pre-scratched rated b...

RE931 Adapter Boards. RE931 adapter boards from Roth Elektronik are suitable for use with SSOP devices. Constructed with an epoxy glass fabric laminate (FR4), these adapter boards are double-sided ...

RE932-01 Adapter Boards. RE932 adapter boards from Roth Elektronik are constructed with FR4 epoxy fibreglass and are double-sided 35 μm copper. Both sides are coated with chemical gold and solder m...

Adapter SO8 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SO8 with 1.27 mm pitch W...

SO ; SOJ Adaptor Boards. Adaptor board suitable for 10 different SO Pad spacing: 1.27mm FR4 epoxy fibreglass laminate Material thickness: 1.50mm Double sided, 35μm copper Through-holes Ø 1.00mm Sol...

Multi-Adapters. These epoxy fibre-glass multi-adapters from Roth Elektronik are available in different models and sizes with the following features:. Double-sided Plated through holes (PTH) Hole di...

Multi-Adapters. These epoxy fibre-glass multi-adapters from Roth Elektronik are available in different models and sizes with the following features:. Double-sided Plated through holes (PTH) Hole di...

RE935-02E Multiadapter QFP32 ; QFN32. Adaption circuit board for QFP32 ; QFN32 (0.50 mm pitch) Epoxy fibre-glass FR4 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Surface chem. Ni/Au Sol...

Adapter SO18 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SO18 with 1,27 mm pitch...

Adapter SSOP8 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SSOP8 with 0.65 mm pit...

Adapter SOT353 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SOT353 with 0.65 mm p...