Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 22.86 x 22.86 x 1.0mm FR Material Grade = CEM3 Length = 22.86mm Thickness = 1mm Width = 22.86mm
Adapter SSOP8 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SSOP8 with 0.65 mm pit...
RE932-01 Adapter Boards. RE932 adapter boards from Roth Elektronik are constructed with FR4 epoxy fibreglass and are double-sided 35 μm copper. Both sides are coated with chemical gold and solder m...
Adapter SO18 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SO18 with 1,27 mm pitch...
SO ; SOJ Adaptor Boards. Adaptor board suitable for 10 different SO Pad spacing: 1.27mm FR4 epoxy fibreglass laminate Material thickness: 1.50mm Double sided, 35μm copper Through-holes Ø 1.00mm Sol...
Adapter SOT353 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SOT353 with 0.65 mm p...
RE931 Adapter Boards. RE931 adapter boards from Roth Elektronik are suitable for use with SSOP devices. Constructed with an epoxy glass fabric laminate (FR4), these adapter boards are double-sided ...
Adapter SO8 with pins Epoxy fibre-glass 1.50 mm Double-sided 35 μm Cu Plated through holes (PTH) Hot air leveling (HAL leadfree) Solder stop mask Adaption circuit board for SO8 with 1.27 mm pitch W...
Multi-Adapters. These epoxy fibre-glass multi-adapters from Roth Elektronik are available in different models and sizes with the following features:. Double-sided Plated through holes (PTH) Hole di...
Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 27.94 x 17.78 x 1.6mm FR Material Grade = CEM3 Length = 27.94mm Thickness = 1.6mm Width = 17.78mm
USB connector conversion board CK-36FeaturesA pin header is included for convenient connection to the main board. There is approximately 5mm from the rear end of the connector to the take-out land,...
Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 30.48 x 24.13 x 1.6mm FR Material Grade = CEM3 Length = 30.48mm Thickness = 1.6mm Width = 24.13mm
Micro-USB Micro-AB connector is converted to 2.54mm pitch. The connector is already mounted.A pin header is included for convenient connection to the main board. There is approximately 5mm from the...
Type = Conversion Board Base Material = Glass Composite Number of Sides = 2 Dimensions = 25.4 x 24.13 x 1.6mm FR Material Grade = CEM3 Length = 25.4mm Thickness = 1.6mm Width = 24.13mm
Multi-Adapters. These epoxy fibre-glass multi-adapters from Roth Elektronik are available in different models and sizes with the following features:. Double-sided Plated through holes (PTH) Hole di...
Type = Conversion Board Base Material = Epoxy Glass Fabric Laminate Number of Sides = 2 Dimensions = 38.36 x 22.86 x 0.8mm FR Material Grade = FR4 Length = 38.36mm Thickness = 0.8mm Width = 22.86mm...
SSOP Adaptor Boards, RE931. RE931 is offered as a board of 7 individual components parts (RE931-01, RES931-02, RE931-03, RE931-04, RE931-05, RE931-06, RE931-07). It features a pre-scratched rated b...
Self-Adhesive Contact Strips. These self-adhesive PCB contact strips from Roth Elektronik are available in a range of pitches with the following features:. Pre-scratched break point One-sided Witho...
Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...
Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...
Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels). 64-Way Standard Extender...
Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels). 64-Way Standard Extender...
Extensions with metal holes. This range of PTH extension boards is available in two combinations: standard and super. The standard 64 // 64 range is assembled with a DIN connector (front and back),...
Eurocard extensions. Range of extensions for testing single- or double-height Eurocards, depth 160 or 220 mm, with type B or C DIN 41612 connectors. The ejector mechanism situated at the front supp...