Drijfschakelaars  (809 artikelen gevonden)

Product Range FLPV Series Operating Pressure Max 10 bar Sensor Body Material Stainless Steel Output Current 400 mA SVHC No SVHC (08-Jul-2021)

The Cable entry point must NOT under any circumstances be submerged. On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside. On the vertical t...

High Temperature Cable Float Switch. The Cynergy3 cable float switch are manufactured from 304 AISI stainless steel and can be used to control liquids up to a temperature of +130°C. The float switc...

Cynergy3 SSF211 and SSF212 Horizontal Float Switches. From Cynergy3, the SSF211 series and SSF212 series are horizontal float switches. They operate in liquids with Specific Gravity (SG) of 0.8 or ...

Device Type = Float Mounting Type = Cable Mount Switch Output = NO Body Material = Stainless Steel 304 Cable Length = 5m Minimum Operating Temperature = 0°C Maximum Operating Temperature = +130°C M...

The cable entry point must NOT under any circumstances be submerged. On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside. On the Vertical t...

Cynergy3 Float SwitchThe Cynergy3 LITTLE EX series vertical/horizontal NO/NC output float switch has a high-density polyethylene body. It has a maximum operating pressure of 10bar. This device has ...

Cynergy3 Float SwitchThe Cynergy3 float switch is a compact, vertical internally mounted device. Mounting is in the top or bottom of the tank from the inside, so it requires access to the inside of...

Cynergy3 MS Series Float Switches. The Cynergy3 MS series of float switches are designed for large tanks, cisterns or reservoirs, and can be installed on submersible pumps. The MS float switches ar...

SSH66 Series Horizontal Steel Float Switches. 304 grade stainless steel construction, ideally suited for use in aggressive environments Consists of reed switch and pivoted actuator magnet High temp...

Device Type = Float Switch Output = Direct Load Body Material = PE Cable Length = 5m Minimum Operating Temperature = 0°C Maximum Operating Temperature = +55°C Maximum AC Voltage = 250V Maximum DC V...

Device Type = Float Mounting Type = Horizontal Switch Output = NO/NC Body Material = Stainless Steel Cable Length = 1m Maximum Operating Temperature = +120°C Maximum AC Voltage = 300V Maximum DC Vo...

Cynergy3 MS Series Float Switches. The Cynergy3 MS series of float switches are designed for large tanks, cisterns or reservoirs, and can be installed on submersible pumps. The MS float switches ar...

Vertical Float Switches - Dual Switching Point. The RSF66 float switches are made from PPS (Polyphenylene Sulphide) therefore suitable for use with a wide range of liquids. The float switches also ...

The Cable entry point must NOT under any circumstances be submerged. On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside. On the vertical t...