Fasebewakingsrelais  (1.105 artikelen gevonden)

Each starter is supplied WITHOUT an overload, therefore an appropriate overload must be selected from the RF38 overload series - for example stock no. ; 685-1309 685-1309 - to match the motor FLC. ...

ANALOG MONITORING RELAY PHASE SEQUENCE MONITORING 3X 360 TO 520V AC 50 TO 60 HZ 2 CHANGEOVER CONTACTS SPRING LOADED CONNECTION, Manufacturer-ID: 3UG4511-2BP20

Conforms to EN 50178, IEC/EN 61800-2, IEC/EN 61800-3 standards, UL/CSA certification and to CE marking. Altivar ATV31 Series with Switch Disconnector, Run/Stop Switch ; Potentiometer. The Altivar 3...

NF EN 60255-6 and IEC 60255-6. UL, CSA, GL, C-Tick, GOST. RM35 BA control relay. Schneider Electric RM35 BA10 measurement and control relay monitors single phase and 3 phase pumps. It controls the ...

ANALOG MONITORING RELAY PHASE FAILURE AND -SEQUENCE 3X 160 TO 690V AC 50 TO 60 HZ 2 CHANGEOVER CONTACTS SPRING LOADED CONNECTION, Manufacturer-ID: 3UG4512-2BR20

NF EN 60255-6 and IEC 60255-6. UL, CSA, GL, C-Tick, GOST. RM35 TF multi-function three-phase network control relays. Schneider Electric RM35 TF measurement and control relays for 3 phase supplies, ...

RS PRO V16

Line Supply and Three Phase Voltage. 3UG4 relays that monitor current, power factor and active current are ideal for monitoring the load of motors and functionality of electronic loads. These devic...

NF EN 60255-6 and IEC 60255-6. UL, CSA, GL, C-Tick, GOST. RM17 U Series Voltage Control Relay. Schneider Electric RM17 U single-phase and direct current voltage control relays that monitor over-vol...

Line Supply and Three Phase Voltage. 3UG4 relays that monitor current, power factor and active current are ideal for monitoring the load of motors and functionality of electronic loads. These devic...

Conforms to EN 50178, IEC/EN 61800-2, IEC/EN 61800-3 standards, UL/CSA certification and to CE marking. Altivar ATV31 Series with Switch Disconnector, Run/Stop Switch ; Potentiometer. The Altivar 3...

Monitoring Application = Phase, Voltage Electrical Phase = 3 Contact Configuration = DPDT Voltage Sensitivity = Overvoltage, Undervoltage Mounting Type = DIN Rail Phase Sensitivity = Phase Failure,...

NF EN 60255-6 and IEC 60255-6. UL, CSA, GL, C-Tick, GOST. RM17 U Series Voltage Control Relay. Schneider Electric RM17 U single-phase and direct current voltage control relays that monitor over-vol...