input potentiometer  (303 artikelen gevonden)

Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, Push-in connection, SIL, 3-way electrical isolatio...

Ex i-temperatuurmeetwaardeomvormer: zet signalen van in de Ex-omgeving geïnstalleerde weerstandsthermometers om en transporteert een 0/4-20 mA-signaal naar een belasting in een veilige omgeving. Vr...

2857 Series RTD Threshold Value Switch. Wago RTD threshold value switch for RTD sensors, potentiometers and resistors monitors and reports signals of up to two switching thresholds. Providing both ...

Ex i-temperatuurmeetwaardeomvormer: zet signalen van in de Ex-omgeving geïnstalleerde weerstandsthermometers om en transporteert een 0/4-20 mA-signaal naar een belasting in een veilige omgeving. Vr...

Module Type = Potentiometer Transducer Input Signal Type = Potentiometer Output Signal Type = Current, Voltage Input Range = 0 → 100K ohms, 0 → 100 ohms Supply Voltage = 90 → 230V ac Operating Temp...

Module Type = Potentiometer Transducer Input Signal Type = Potentiometer Output Signal Type = Current, Voltage Input Range = 0-100K ohms, 0-100 ohms Supply Voltage = 22 → 240 V dc, 90 → 230V ac Ope...

Supply Voltage = 42.4 V dc Diameter = 38 mm Minimum Temperature Input = -40°C Maximum Temperature Input = 85°C Series = 248

Accessory Type = I/O Modules Series = SIM 1274 Input Type = 2 Potentiometer inputs For Use With = SIMATIC S7-1200 SIM 1274

The output-loop-powered temperature transmitter transmits up to two sensor signals from RTD and TC sensors as well as from resistance-type sensors and voltage encoders via the HART communication or...

Output loop-powered temperature transducer, two universal inputs for thermocouples, resistance and voltage sensor, HART communication, freely configurable, installable in Zone 2, SIL 2/3

Pepperl+Fuchs SC-System Signal Conditioners. Pepperl + Fuchs SC-System signal conditioners are especially designed for general purpose applications and ensure reliable process communication. High-q...

The Phoenix Contact MACX series have temperature measuring transducer with analog output and 1 limit value relay. This transducer have push in connection with 4 mA to 20 mA current output signal.Re...

Output loop-powered temperature transducer, two universal inputs for thermocouples, resistance and voltage sensor, HART communication, freely configurable, installable in Zone 2, SIL 2/3

ATEX, IECEx, FM, UL, GOST. Temperature Measuring Amplifier. Professional range of galvanically isolated Temperature Measuring Amplifier, designed to evaluate the differential temperature - dependan...

For a safe series connection the use of the normally open contacts at the termination points 2.5 and 2.6, as well as 3.5 and 3.6 is necessary. For a safe parallel connection the use of the normally...