maxim integrated  (1.506 artikelen gevonden)

Maximum Output Current = 180mA Output Voltage = 3.3 V, 5 V Mounting Type = Surface Mount Quiescent Current = 25µA Pin Count = 8 Output Type = Fixed Dimensions = 3.1 x 3.1 x 0.95mm Height = 0.95mm W...

Battery Type = Lithium-Ion Mounting Type = Surface Mount Package Type = TDFN Pin Count = 14 Typical Operating Supply Voltage = 4.2 to 20 V Dimensions = 3.1 x 3.1 x 0.75mm Length = 3.1mm Width = 3.1...

Simple, Flexible Design Provides Up to 3W to the Transformer in Isolated Power Supplies Single Supply +5V or +3.3V Operation Internal Resistor-Programmable Oscillator Mode External Clock Mode with ...

ModelGauge m5 Algorithm Eliminates Error when Approaching Empty Voltage Eliminates Coulomb-Counter Drift Current, Temperature, and Age Compensated Does Not Require Empty, Full, or Idle States No Ch...

Single USB Switch in 3mm x 3mm Package Autoreset Feature Saves System Power Guaranteed 500mA Load Current Built-In 20ms Fault-Blanking Circuitry Active-High or Active-Low Control Logic Fully Compli...

Up to 90% Efficiency No External Diode or FETs Needed 1.5μA Quiescent Supply Current 0.1μA Logic-Controlled Shutdown ±1% Output Voltage Accuracy Fixed Output Voltage (MAX1724) or Adjustable Output ...

Guaranteed Data Rate Options 230kbps (MAX3000E) 4Mbps (MAX3001E) 20Mbps (MAX3002–MAX3012) Bidirectional Level Translation Without Using a Directional Pin (MAX3000E/MAX3001E/MAX3002/MAX3003) Unidire...

Switching Regulators, Step-Down DC-DC Controllers, Maxim Integrated

The MAX202E-MAX213E, MAX232E, and MAX241E are a family of transceivers with high ±15kV ESD HBM protection and integrated charge pump circuitry for single +5V supply operation. The MAX211E/MAX213E/M...

90% Efficiency for 30mA to 2A Load Currents Up to 24W Output Power 110μA (max) Supply Current 5μA (max) Shutdown Current 2V to 16.5V Input Range Preset 12V or Adjustable Output Voltage Current-Limi...

RS-422 Line Drivers and Receivers, Maxim Integrated

Switching Regulators, Step-Up DC-DC Converters, Maxim Integrated

The MAX218 transceiver is intended for battery-powered communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating...

Guaranteed 500mA Output Current Low 130mV Dropout at 500mA Up to ±1% Output Voltage Accuracy Preset at 1.5V, 1.8V, 2.5V, 3.3V, or 5.0V Adjustable from 1.25V to 5.0V Reset Output with 4ms Timeout Pe...

Guaranteed On-Resistance Match Between Channels, < 5 Ω Max Low On-Resistance, < 100Ω Max Guaranteed Flat On-Resistance over Specified Signal Range, 7Ω Max Guaranteed Charge Injection, < 10pC INO(OF...