Profibus input / output module  (152 artikelen gevonden)

The Omron unique CompoBus/S is the most efficient I/O bus for machine automation. With free topology and up to 500 m bus length in long-distance mode, it can be used as a remote I/O system. In high...

The Omron CS1W-AD series is a Analog input unit having 8 x inputs of 0.25 ms/pt conversion timeAccessory for CS1W series

The Omron unique CompoBus/S is the most efficient I/O bus for machine automation. With free topology and up to 500 m bus length in long-distance mode, it can be used as a remote I/O system. In high...

The Omron CS1W-PNT21 is a PROFINET IO Controller (master) unit for CS-series, 1 x RJ45 socketUnits can be used in the configuration with CS1D (duplex system)

The Omron CRT1-ROS series is a CompoNet output unit has 8 x relay outputs and also screw terminals.Easily change the input or output range with a switch setting

The Omron CS1D-PA207R is a power supply unit for duplex system, has a 100-120/200-240 VAC high power rating.Easy duplexing of CPU units Automatic recovery to duplex operation Remove or add units wi...

The Omron CS series digital I/O units provides up to 96 I/O points per unit as input, output or mixed. the digital I/O units serve as the PLCs interface to achieve fast, reliable sequence control. ...

The Omron GRT1-OD4G-3 is a Smart Slice 4 PNP x digital outputs, with overcurrent and short-circuit protection having 2- wire connection type.Degree of protection IP20

The Omron GRT1-ID series is a SmartSlice 8 x digital PNP inputs. When used with OMRONs CS1/CJ1 DeviceNet or CompoNet master units, no configuration tool is required.Degree of protection (IP) IP20

The Omron Additional NX unit power supply unit has screwless push-in terminal block external connection. It has power supply voltage of 24 VDC .The over all dimensions 12 x 100 x 71 mm.Insulation r...

The Omron GRT1 series is a PNP type SmartSlice 4 x digital outputs with overcurrent and short-circuit protection.Easy set-up, backup and restore functions 3-wire I/O connection with push-in technol...

The Omron NX I/O power connection unit has screwless push-in terminal block external connection. It has over all dimensions of 12 x 100 x 71 mm.Number of I/O power terminals 16 terminals Current ca...

The Omron CS1W-OD212 is a Digital output unit, with 16 transistor outputs. It has PNP with short circuit protection of 0.5 A.It has a supply voltage of 24 VDC.Easy duplexing of CPU units Easy duple...

The Omron GX-ECO series is a EtherCAT I/O unit having 2 x encoder inputs and also line driver.Degree of protection (IP) IP20

The Omron CS1D-BC052 is a Duplex CPU backplane, with 5 input and output slots. It uses CS1D-PA207R power supplies only. It also include two units for power supply section.Easy duplexing of CPU unit...