sheet metal & panel fasteners  (202 artikelen gevonden)

Self-tapping threaded insert. Set of inserts with an inner and outer thread. Equipped with a cutting slot, these inserts are suitable for most applications. In most materials, these inserts contrac...

Self-tapping threaded insert. Set of inserts with an inner and outer thread. Equipped with a cutting slot, these inserts are suitable for most applications. In most materials, these inserts contrac...

Self-tapping threaded insert. Set of inserts with an inner and outer thread. Equipped with a cutting slot, these inserts are suitable for most applications. In most materials, these inserts contrac...

Nuts sold separately, for the full kit please refer to RS stock no ; 425-7480 425-7480. Crimp nuts. Crimp nuts for screw fixing to thin panels wherever rear access is impossible. When fitting, the ...

Nuts sold separately, for the full kit please refer to RS stock no ; 425-7480 425-7480. Crimp nuts. Crimp nuts for screw fixing to thin panels wherever rear access is impossible. When fitting, the ...

Rivkle Rivet Tool and Rivets. Our range of Rivet Nuts from Bollhoff are a multipurpose solution for adding a load carrying internal or external thread to a thin work piece, and can be installed int...

Thread Size = M8 Flange Diameter = 16mm Fixing Hole Diameter = 11mm Body Depth = 18mm Material = Steel Finish = Plain Thickness of Material Maximum = 3mm Thickness of Material Minimum = 0.5mm

Self-tapping threaded insert. Set of inserts with an inner and outer thread. Equipped with a cutting slot, these inserts are suitable for most applications. In most materials, these inserts contrac...

10 ; 12 mm long through-hole types are counterbored 4.8 deep at non-clinched end. Hex dimension 6.4 mm and 4.0 mm Ø for M3 sizes, Hex dimension 7.9 mm and 4.8 mm Ø for M4 sizes. Self-clinching Stan...

Thread Size = M3 Fixing Hole Diameter = 5mm Finish = Plain

Metric Replacement Inserts. Recoil helically wound wire thread inserts can be used to strengthen threads giving applications a longer life. Each insert shares the load over the entire bolt and hole...

Self-tapping threaded insert. Set of inserts with an inner and outer thread. Equipped with a cutting slot, these inserts are suitable for most applications. In most materials, these inserts contrac...

Thread Size = M3 Head Diameter = 4.5mm Length = 10mm For Panel Thickness Minimum = 1mm Fixing Hole Diameter = 3mm Material = Steel Finish = Zinc plated & clear Passivated

Metric Replacement Inserts. Recoil helically wound wire thread inserts can be used to strengthen threads giving applications a longer life. Each insert shares the load over the entire bolt and hole...

10 ; 12 mm long through-hole types are counterbored 4.8 deep at non-clinched end. Hex dimension 6.4 mm and 4.0 mm Ø for M3 sizes, Hex dimension 7.9 mm and 4.8 mm Ø for M4 sizes. Self-clinching Stan...