speed  (49.666 artikelen gevonden)

Air Flow = 14400m³/h Blade Span = 600mm Fan Type = Duct Number of Speeds = 1 Plug Type = Type F - German Schuko, Type G - British 3-pin Supply Voltage = 230 V Series = VF600

CIF Carbide Milling Bits. High precision milling drill and engraving bit High grade solid carbide remain sharp for much longer than standard steel bits A high speed is recomended to produce good qu...

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass...

The Broadcom ACNT-H61L is a low-power digital optocoupler device in 15mm wide creepage and 14.2mm clearance that combines a light emitting diode (LED) and an integrated high gain photo detector des...

The output can be operated either as a switching output or in IO-Link mode Fully configurable via IO-Link v1.1. Electrical outputs can be configured as PNP/NPN/Push-pull, normally open or normally ...

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass...

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass...

944The Broadcom ACPL-M61T, AEC-Q100 compliant, optically coupled gates combine an AlGaAs light emitting diode and an integrated high gain photo detector. The output of the detector IC is an Open-co...

The output can be operated either as a switching output or in IO-Link mode Fully configurable via IO-Link v1.1. Electrical outputs can be configured as PNP/NPN/Push-pull, normally open or normally ...

Diameter = 65mm Arbor Included = Yes Material = High Speed Steel Cut Depth = 38mm

CIF Carbide Tungsten Drill Bits. High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass...

Automotive Digital Optocouplers, Avago Technologies. Digital optocouplers for automotive applications are designed to meet the digital CANBus interface. Isolation applications range from power supp...

The output can be operated either as a switching output or in IO-Link mode Fully configurable via IO-Link v1.1. Electrical outputs can be configured as PNP/NPN/Push-pull, normally open or normally ...

Roughness Tester Accessory Type = Column Stand Measuring Speed = 0.75mm/s For Use With = Surftest SJ-410

The CIF Tungsten Carbide Drill Bit has Monobloc. Reinforced shank 3.17mm(1/8 ″) and Dia 1.7mm. .In stock from 0.3 mm to 3.17 mm Minimum drilling speed 20,000 rpm The smaller the diameter of the dri...