Aim-TTi 1908P Bench Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 1000V ac Max

EN61010-1, EN61010-2-030 ; EN61010-2-033, EN61326-1 EMC. IVI driver, LV/CVI driver, USB driver. In dual measurement mode a completely independent but complementary measurement can be made and displayed on the secondary display. The two independent measurements are made alternately, not simultaneously, and the display update rate for each measurement is consequently reduced (this is not the same as dual display mode, where both a measurement and a modified version of that measurement are displayed e.g. ac Volts and the dB equivalent). Aim-TTI 1908P Series Dual Measurement Bench Multimeter. Aim-TTi 1908 Series is a dual measurement, dual display bench-top/portable multimeter. It features continuity and diode test, automatic or manual ranging, linear scaling with offset, dB measurements, limits comparison, percentage deviation (%), min-max storage, power measurement in watts or VA, automatic data logging and external triggering. The logger function can store up to 500 readings from the main display in non-volatile memory. The two displays can be used to display a measurement along with the selected range (e.g. 100 Vdc), a measurement in two different units (e.g. AC volts and dBm), the result of a calculated function (e.g. value and % deviation), two parameters of one signal (e.g. AC and DC volts) or two different signals (e.g. AC volts and DC current). Software 1908-PC Link provides remote control of main functions and logging function with graphical and tabular displays (logged data can be exported to a CSV file). Model 1908P can be remotely controlled via its RS232, USB or LAN interface. Model 1908 (non ‘P ‘) can only be controlled via USB. For an optional GPIB module see stock number 144-5481. Features and Benefits. Affordable 5.5 digit high performance bench/portable multimeter, 120 000 counts. Dual display (main display and secondary display) and dual measurement capability. Mains power or Internal rechargeable batteries for true portability. High accuracy and resolution 0.02%, 1 μV, 0.1 μA, 1 mΩ. Manual or Auto-ranging. True RMS AC and AC+DC measurement. DC and AC volts, DC and AC current, resistance, capacitance, frequency, and temperature measurement. Measurement post-processing. Continuity and diode checks. Two or four wire selectable ohms measurement. Display nulling and ohms null. Selectable measurement speed. Touch hold mode - holds onto a stable reading until updated. 500 point data logger with timer. Temperature measurement for PT100 or PT1000 sensors. Wide range of computing functions e.g. Ax + B. External input/output remote triggering. Closed case calibration. USB interface standard (1908 ; 1908P) plus RS232, LAN/LXI. Kensington security slot incorporated. Dimensions 250 x 97 x 295 mm. Weight 3.2 kg