|  |
| |
| Artikelnr.:
3523E-1773548 Fabrikantnr.:
KSZ9031RNXCC EAN/GTIN:
geen gegevens |
| |
|
| | |
| The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.Single-chip 10/100/1000Mbps Ethernet transceiver KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full) On-chip termination resistors for the differential pairs On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core Jumbo frame support up to 16KB 125MHz Reference Clock Output Energy-detect power-down mode Meer informatie: | | Standard Supported: | 1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3 | Number of Channels per Chip: | 1 | Typical Data Rate: | 1000Mbit/s | Power Supply Type: | Single | Typical Operating Supply Voltage: | 3.3 V | Mounting Type: | Surface Mount | Package Type: | QFN | Pin Count: | 48 | Dimensions: | 7 x 7 x 0.8mm | Maximum Operating Temperature: | +70 °C | Automotive Standard: | AEC-Q100 | Minimum Operating Temperature: | 0 °C | Width: | 7mm |
|
| | |
| | | |
| Andere zoekwoorden: ethernet transceiver ic, 1773548, Semiconductors, Interface ICs, Physical Layer Transceivers, Microchip, KSZ9031RNXCC |
| | |
| |