| |
|
| Artikelnr.: 3523E-1904826 Fabrikantnr.: DS1233D-5+ EAN/GTIN: geen gegevens |
| |
|
| | |
| The DS1233D EconoReset uses a precision temperature-compensated reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated, which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for approximately 350ms to allow the power supply and processor to stabilize.Automatically restarts microprocessor after power failure Maintains reset for 350ms after VCC returns to an in-tolerance condition Accurate 5%, 10%, or 15% microprocessor 5V power supply monitoring Reduces need for discrete components Precision temperature-compensated voltage reference and voltage sensor Low-cost TO-92 package or surface mount SOT-223 package Internal 5k pullup resistor Compatible with Motorola 68XXX series and HC16 Microprocessors Operating temperature of -40°C to +85°C Meer informatie: | | Voltage Supervisor Type: | Microprocessor Power Supply Supervisor | Number of Supervisors: | 1 | Power Fail Detection: | Yes | Maximum Reset Active Time: | 450ms | Mounting Type: | Through Hole | Package Type: | TO-92 | Pin Count: | 3 | Dimensions: | 4.95 x 3.94 x 4.95mm | Maximum Operating Supply Voltage: | 5.5 V | Maximum Operating Temperature: | +85 °C | Minimum Operating Supply Voltage: | 1.2 V | Minimum Operating Temperature: | -40 °C | Width: | 3.94mm |
|
| | |
| | | |
| Andere zoekwoorden: Micro-processor, Processorbewakings-IC, Processorbewakings-ICs, Watchdog IC, Watchdog ICs, Spanningsbewaking IC, voeding inbouw, 1904826, Semiconductors, Power Management ICs, Voltage Supervisors, Maxim Integrated, DS1233D5+ |
| | |
| |