RS PRO M16 Drop In Anchor Setting Tool

Correct setting punch must be used when installing anchors. RS PRO Drop-in Anchors and Setting Punches. RS PRO deformation controlled anchor system for use in concrete with a compressive strength greater than 20N/mm ;sup>2 ;/sup> These anchors are suitable for various jobs for non-structural applications in both cracked and non-cracked concrete. The system includes setting punches which means the right setting punch needs to be used in order to ensure correct installation. Available in a range of lengths and sizes to accommodate a variety of applications, these anchors ensure a secure fixing suitable for medium to heavy-duty loads. Anchors available in A4 stainless steel or zinc plated and passivated steel.Options include: ;I>Drop In Anchor Zinc Plated and Yellow Passivated - Min 5μm ;/I> ; 622-2127 622-2127 - M6 ; 622-2111 622-2111 - M8 ; 622-2133 622-2133 - M10 ; 622-2149 622-2149 - M12 ; 622-2155 622-2155 - M16 ;I>Stainless Steel Grade A4-316 Drop in anchor ;/I> ; 622-2161 622-2161 - M6 ; 622-2177 622-2177 - M8 ; 622-1720 622-1720 - M10 ; 622-1736 622-1736 - M12 ; 622-1758 622-1758 - M16 ;I>Setting Tool - Drop in Anchor Setting Punches ;/I> ; 622-1742 622-1742 - M6 ; 622-1764 622-1764 - M8 ; 622-1770 622-1770 - M10 ; 622-1792 622-1792 - M12 ; 622-1786 622-1786 - M16 RS PRO have a great range of masonry plugs, anchors, through bolts to meet all your fixing requirements. Features and Benefits:. Suitable for use in non-cracked concrete between C20/25 ; C50/60 European Technical Approval to ETAG 001-4 Internal thread - suitable for attaching threaded studs or bolts Permanent socket to allow removal and replacement of fixture. Typical Applications:. Drop-In anchors are designed for anchoring into concrete. First you drill a hole in the concrete then drop the anchor into the pre-drilled hole in the concrete. Next you use the correct setting tool which expands the anchor within the hole in the concrete. This type of system lets you remove the bolt when required but leaves the anchor in place and hidden in the concrete. They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed. Why RS PRO? RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they ‘re only given the RS PRO seal of approval if we ‘re confident of their exceptional quality, which means you can be confident too.