Ansmann Energy 16 Plus Battery Charger For NiCd, NiMH 9V, AA, AAA, C, D with EU, UK plug

Ansmann Battery ChargerThe Ansmann battery charger is an intelligent device with discharge function, including a USB charging socket. It is used as a charging and maintenance device for 1 to 12 AAA or AA, 1 to 6 C or D and 1 to 2 9V rechargeable batteries of NiCd and NiMH, automatic refreshing function. This has EURO and UK plug type. LED indicators are useful as they indicate: LED green: Capacity over 80% of the nominal capacity LED orange: Capacity between 25% to 80% of the nominal capacity LED red: Capacity under 25% of the nominal capacity Note: Charging currents: Mono D: 6x 1000mA Baby C: 6x 1000mA Mignon AA: 12x 1000mA Micro AAA: 12x 400mA 9V E-Block: 2x 60mA USB: 2x 1000mAFeatures and BenefitsCharging time for Mignon AA 1000mAh for 1.2h Capacity quick test of the inserted cells for approximately 10 seconds Auto-diagnosis of the inserted cells with automatic start of a pre-charging and/or refreshing process, if required, tired cells will be activated Fast charging Microprocessor controlled charging Battery-full detection (-dV) Automatic switch to trickle charge Multiple over charging protection Individual supervision of each cell position Faulty cell and alkaline battery detection Easy handling due to fully automatic control Clear indicators and controls for each charging position Reverse polarity protectionCertificationsIP20 rated UL94V approved CE certified TUV GS certified cTUVus certified