| |
|
| Artikelnr.: 3523E-7858617 Fabrikantnr.: ADL5511-EVALZ EAN/GTIN: 5059042379099 |
| |
|
| | |
| Evaluation Board for ADL5511 DC to 6GHz Envelope and TruPwr RMS Detector. The ADL5511-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5V/100mA power supply. The 5V power supply should be connected to the clip leads labeled VPOS and GND. The RF input signals are applied to an edge-mounted SMA type RF connector (RFIN). The envelope output signal is accessible via the SMA connector labeled VENV. The RMS output and envelope reference signals are accessible on the clip leads labeled VRMA and EREF. To access the RMS output and envelope reference output via SMA cables, SMA connectors can be soldered on to the pads labeled VRMS1 and EREF1. ADL5511. Envelope tracking RF detector with output proportional to input voltage Separate TruPwr rms output No balun or external tuning required Excellent temperature stability Input power dynamic range of 47dB Input frequency range from dc to 6GHz 130MHz envelope bandwidth Envelope delay: 2ns Single-supply operation: 4.75V to 5.25V Supply current: 21.5mA Power-down mode: 130μW Meer informatie: | | RF Technology: | RF Envelope, RMS Detector | Kit Classification: | Evaluation Board | Featured Device: | ADL5511 | Frequency: | 6GHz | Kit Name: | TruPwr |
|
| | |
| | | |
| Andere zoekwoorden: Evaluatieboard, RMS-DC-converter, eval board, 7858617, Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools, Development Tools & Single Board Computers, Communication & Wireless Development Tools, Analog Devices, ADL5511EVALZ |
| | |
| |