SATA III RAID PCIe Add-On Card 2.5" HDD / SSD, 2 Port

SATA III RAID PCIe Add-On Card 2.5" HDD / SSD, 2 Port

Extends your system with 2 x SATA III interfaces including RAID function

Vordeleen:

• Interfaces for 2 x SATA III SSD/HDD
• Up to 6 Gbps data transmission per SATA port
• 500 MB/s transmission rate per lane
• Compatible with PCI Express X2, X4, X8, X16 slots
• Supports Gen1i, Gen2i, Gen2m, Gen2x & Gen3i
• Hot Plug and Hot Swap

The DIGITUS® 2-port RAID card with two SATA III interfaces features a host controller that manages two full-fledged 2.5-inch SSD/HDD hard disks and brings server-class functions to your desktop. This card enables the use of the latest and fastest hard disks with 6 Gbps and also offers backwards compatibility with older SATA 1.5 / 3 Gbps standards. Each PCI-Express 2.0 lane offers a capacity of up to 500 MB/s. The SATA HDD/SSDs can be operated as JBOD or as RAID (RAID 0 or RAID 1).

Technische data:

• Connectors: 2 x SATA III 6Gb/s
• Installation: 2 x 2.5" HDD/SSD
• Chipset: Marvell / 88SE9230
• Compatible with PCIe specification V 2.0, backwards compatible with 1.1
• Supports 6 Gbps, 3 Gbps & 1.5 Gbps hard disks
• Conforms with serial ATA specification 3.1
• PCIe X2 interface, compatible with X4, X8 & X16
• Supports Gen1i, Gen2i, Gen2m, Gen2x & Gen3i
• Supports Native Command Queue (NCQ)
• Supports Port Multiplier FIS Based Switching or Command Based Switching
• Supports Partial and Slumber Power Management settings
• Supports functions: JBOD, RAID 0, RAID 1 and Marvell HyperDuo
• Supports Windows 10, 8, 7 / Windows server 2003, 2008 R2, DOS
• Supports Hot Plugging & Hot Swapping