Aansluitklemmen  (403 artikelen gevonden)

Jumper Bars. For use with SNK terminal blocks Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch Pre-cut poles

Terminal Cover. Requires a separator end section every 40cm approx and at DIN rail extremities. A 6mm dia hole is required in the cover at each separator. Transparent PVC protective cover, 1m lengt...

UL listed,CSA certified,ASE,SETI,SEMKO,NEMKO,DEMKO,GL,FIMKO,VDE,CEGB,KEMA,E ExiI/II,E Exei/II. Terminals of 70mm² and larger incorporate a hexagon key actuated rising clamp system. Terminal sizes u...

Jumper Bars. For use with SNK terminal blocks Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch Pre-cut poles

Jumper Bars. For use with SNK terminal blocks Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch Pre-cut poles

End cover stock no. ; 424-866 424-866 may be used with this terminal. Thermocouple Cable Accepting. Accepts any type of thermocouple from 0.9mm to 1.5mm diameter without forming a `cold ‘ junction ...

MISTRAL65 Consumer Units. The new range of MISTRAL65 consumer units allow almost any type of electrical distribution system to be implemented in industrial, commercial and residential environments....

Jumper Bars. For use with SNK terminal blocks Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch Pre-cut poles

Jumper Bars. For use with SNK terminal blocks Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch Pre-cut poles

Terminal End Covers. Various colours available

BS 6273:1982, EN 50 045, DIN 46277-2. 4mm ;sup>2 ;/sup> Miniature Terminals. A miniature range of screw terminals designed for mounting onto symmetric rail. The terminals are moulded in tough flame...

Jumper Bars. For use with SNK terminal blocks Available in 5, 6, 8, 10, 16, 22 and 26mm terminal pitch Pre-cut poles

Isolating terminals must only be used for isolating sections of a circuit for test purposes, they must never be used to switch devices on or off when power is applied. Micro Fuse Terminals. Suited ...