extender boards & adapter boards  (64 artikelen gevonden)

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

Type = Multi Adapter Board Base Material = Epoxy Glass Fabric Laminate Number of Sides = 2 Dimensions = 20.32 x 7.94 x 1.5mm Copper Thickness = 35µm FR Material Grade = FR4 Length = 20.32mm Thickne...

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

Eurocard test adapter in accordance with DIN 41612. Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4) For cards up to 3 ...

MSOP 8 Adapter, Type RE903. Adaption board for 1 x MSOP-8 1.5 mm FR4 epoxy glass-reinforced laminate (through hole plated) Soldering and component side surface made of chem. AU and solder mask

Type = Multi Adapter Board Base Material = Epoxy Glass Fabric Laminate Number of Sides = 2 Dimensions = 20.32 x 13.65 x 1.5mm Copper Thickness = 35µm FR Material Grade = FR4 Length = 20.32mm Thickn...

Type = DIP adapter evaluation module Number of Sides = 1

Support/eject mechanisms and terminal assemblies which may be soldered onto pads on each connector track for attaching test probes (typically for measuring voltage levels). 64-Way Standard Extender...

Extensions with metal holes. This range of PTH extension boards is available in two combinations: standard and super. The standard 64 // 64 range is assembled with a DIN connector (front and back),...

TSOP I/II Adaptor Boards, RE900. 1.5 mm FR4 epoxy, 35 μm CU on both sides Plated drill holes, Ø 1 mm Soldering and component side surface made of chem. nickel/gold (Ni/Au) and solder mask Pre-score...