noise  (25.198 artikelen gevonden)

The ON Semiconductor NCV8187 is 1.2 A LDO linear voltage regulator. It is a very stable and accurate device with low quiescent current consumption, low dropout, low output noise and very good PSRR....

The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without ...

The ON Semiconductor NCP1118x integrates a peak current mode PWM controller employing mWSaver technology and a highly robust 800 V SJ MOSFET providing especially enhanced performance in flyback con...

Package Type = SOT-23 Power Supply Type = Single Number of Channels per Chip = 1 Pin Count = 5 Typical Single Supply Voltage = 36 V Typical Gain Bandwidth Product = 11MHz Maximum Operating Temperat...

The NCV8187 is a 1.2 A LDO Regulator with low quiescent current consumption (typ. 30 μA over the full temperature range), low dropout voltage, low output noise and very good PSRR. The regulator inc...

The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without ...

Operating Input Voltage Range: 1.7 V to 5.5 V Available in Fixed Voltage Options: 0.8 V to 3.6 V Low Dropout: 250 mV Typical at 300 mA @ 2.8 V High PSRR 70dB at 1kHz Thermal Shutdown and Current Li...

OPB610, OPB611, OPB620 and OPB621 Series Slotted Optical Switches. This family of slotted optical switches, from Optek Technology, are designed to be mounted onto a PCB. The OPB610 and OPB620 consi...

The NCV8187 is a 1.2 A LDO Regulator with low quiescent current consumption (typ. 30 μA over the full temperature range), low dropout voltage, low output noise and very good PSRR. The regulator inc...

Precision LinCMOS Operational Amplifiers

Operating Input Voltage Range: 1.7 V to 5.5 V Available in Fixed Voltage Options: 0.8 V to 3.6 V Low Dropout: 250 mV Typical at 300 mA @ 2.8 V High PSRR 70dB at 1kHz Thermal Shutdown and Current Li...

The OPTIBELT STD timing belts have curvilinear, particularly shear-resistant teeth. The timing belt is made from chloroprene, with glass-fibre tension cord. The timing belt tooth geometry combined...

The NCV8187 is a 1.2 A LDO Regulator with low quiescent current consumption (typ. 30 μA over the full temperature range), low dropout voltage, low output noise and very good PSRR. The regulator inc...

High Voltage ; High Current Op Amps. Power operational amplifiers from Texas Instruments with high current outputs suitable for driving low impedance and difficult loads. Many of these devices are ...

Operating Input Voltage Range: 1.7 V to 5.5 V Available in Fixed Voltage Options: 0.8 V to 3.6 V Low Dropout: 250 mV Typical at 300 mA @ 2.8 V High PSRR 70dB at 1kHz Thermal Shutdown and Current Li...