The Boe-Bot robot is NOT supplied as part of the kit but is available seperately: ; 781-0924 781-0924. Tank-tread kit for Boe-Bot mobile robot. Turn your Boe-Bot Robot into a tank with this add-on ...
The Boe-Bot robot is NOT supplied as part of the kit but is available seperately: ; 781-0924 781-0924. Line-follow kit for Boe-Bot mobile robot. This kit uses QTI infrared emitter/receiver modules ...
Boe-Bot, ActivityBot and Shield Robot With Arduino Kits include 2 x Encoder Wheels and tyres as standard. Mobile robot encoder wheel ; tyre. A plastic wheel with an O-ring tyre designed to work wit...
USB to Serial RS-232 Adapter. A compact USB to Serial (RS-232) adapter to provide a Virtual Com Port for boards that have a DE9 (9-pin) female serial connector, but require a USB connection to a PC...
Assortment of servo horns. R/C servo motor, continuous rotation. The Parallax Continuous Rotation Servomotor is ideal for prototyping mobile (wheeled) robots. It is easily interfaced with any micro...
RFID Tags are available separately: RS Part Nos. ; 843-0806 843-0806 , ; 843-0800 843-0800 , ; 843-0793 843-0793 , ; 843-0803 843-0803. RFID EM4100 card reader module. The Parallax RFID Reader Modu...
RFID Tags. These are passive read only RFID tags. They hold a unique 64-bit number that can be read by an RFID reader. The frequency and protocol must match the reader you are using. Unique 64 bit ...
XBee Adapter Boards. Adapter boards for interfacing an Xbee wireless module to a PC or microcontroller. The USB board provides an easy PC interface to configure XBee modules using the Digi X-CTU so...
Parallax screwdriver. You will need an Arduino processor board (not supplied) such as an Arduino Uno, RS No: ; 715-4081 715-4081. Arduino BoE robotics Shield kit. Make your Arduino the on-board bra...
USB cable. Download learning materials from: http://learn.parallax.com/tutorials/robot/scribbler-robot/scribbler-3. Propeller Scribbler 3 mobile robot. The Scribbler S3 is the third incarnation of ...
Standard servo motor, servo cable and mounting hardware. PING))) is ideal for use with Raspberry Pi and Arduino based robot projects. PING))) ultrasonic range sensor kit. The PING))) ultrasonic sen...
R/C servo motor, standard 180deg. The Parallax Standard Servomotor is ideal for prototyping robot arm and animatronic applications. It can hold any position over a 180° range and is easily interfac...
ColorPAL, colour/light sensor module. The ColorPAL is a miniature colour and light sensor which, through its RGB LED, doubles as a colour generator. For sensing colour, the ColorPAL uses its LED to...
220Ω resistor, 0.1uF capacitor, 0.01uF capacitor. Flexiforce Sensor Demo Kit. Tekscan ‘s FlexiForce® sensor can be used to measure the force between two surfaces. The single element sensor acts as ...
Barometric altimeter module. This module includes a high linearity barometric pressure sensor MS5607 and a high resolution temperature output, allowing implementation of an altimeter/thermometer wi...
Parallax Inc Sensor Development KitsThe Parallax Inc sensor is a pyroelectric device that detects motion by measuring changes in the infrared (heat) levels emitted by surrounding objects. This moti...
Propeller 1 Microcontrollers. The Parallax P8X32A (Propeller) is an 8-core 32-bit microprocessor designed to provide high-speed processing for embedded systems.It is available in two package format...
"What's a Microcontroller?" book with 40 hands-on activities, Electronic input, output and passive components for building circuits, USB cable. BASIC Stamp Activity Kit, USB Version. Know electroni...
RN-42 Class 2 Bluetooth Module. The RN-42 Bluetooth Module provides a reliable low-cost method for creating a wireless serial communication interface between two devices such as a microcontroller, ...
Parallax screwdriver, USB-A to Mini-B cable. BASIC Stamp Boe-Bot mobile robot kit. Build your own mobile robot with a BASIC Stamp 2 microcontroller brain. Follow the clear, step-by-step instruction...
RFID Tags. These are passive read only RFID tags. They hold a unique 64-bit number that can be read by an RFID reader. The frequency and protocol must match the reader you are using. Unique 64 bit ...
Propeller 1 Microcontrollers. The Parallax P8X32A (Propeller) is an 8-core 32-bit microprocessor designed to provide high-speed processing for embedded systems.It is available in two package format...
Parallax Inc Sensor Development KitsThe Parallax Inc PING((( ultrasonic sensor provides precise, non-contact distance measurements from about 2cm to 3meters (0.8 inches to 3.3 yards). This is a ver...
Parallax Inc RF Transceiver Adapter BoardThe Parallax Inc RF Transceiver Adapter Board comes in a partially assembled kit form and provides a cost-effective solution to interfacing a PC or microcon...
Arduino™ BoE prototyping Shield. The Board of Education Shield plugs into an Arduino™ or Arduino-compatible processor board for breadboard prototyping and access to servomotor ports, with no solder...
Parallax Inc. Single Relay ModuleThe Parallax Inc. single relay board allows you to control high power devices (up to 10A) via an on-board relay. This module operates on a supply voltage rating of ...
Parallax 20 x 4 serial backlit mono LCD display. The Parallax Serial LCDs are very functional, low-cost liquid crystal displays that can be easily interfaced to and controlled by a microcontroller ...
Adapter kit for 0.1in pitch header connection. 2-axis gimbal analogue joystick module. This quad-bearing gimbal joystick provides a two-axis resistive output for controlling parameters such as posi...
BASIC Stamp Microcontroller modules. A range of BASIC Stamp microcontroller modules that can be programmed in a high-level language, PBASIC. RS Product Codes ; 405-654 405-654 BS2-IC BASIC Stamp 2 ...
PIR sensor module (Wide-angle). The PIR (Passive Infra-Red) Sensor is a pyroelectric device that detects motion by measuring changes in the infrared (heat) levels emitted by surrounding objects. Wh...
The Parallax Inc through-hole, 80-way edge connector socket with 1.27 mm spacing holds the P2 edge module in a right-angle, parallel to the printed circuit board. This is a low insertion-force conn...
The Parallax Inc P2 to MikroBUS click adapter connects MicroE Click series modules to our most popular Propeller 2 development systems for quick multicore prototyping and project design.Low-inserti...
The Parallax Inc adapter provides a convenient way to add wireless programming and serial communication capabilities to the Parallax Propeller P2 microcontroller. The adapter connects a Parallax ES...
The Parallax Inc cyber bot Robot Kit has a user transparent on-board multicore microcontroller assists the micro bit, handling the real time servo motor control and sensors built on the breadboard....
The Parallax Inc Propeller 2 Edge Module Breadboard provides a convenient rapid prototyping solution for experimenting and developing with the Propeller 2 microcontroller. The P2 Edge Module Breadb...
Family Name = Propeller Package Type = TQFP Mounting Type = Surface Mount Pin Count = 100 Data Bus Width = 32bit Program Memory Size = 16 kB Maximum Frequency = 25MHz Program Memory Type = ROM
The Parallax Inc P2-ES Eval Board Accessory Set is designed for use with Propeller 2 development board 2x6 accessory headers. Each board’s 2x6 pass-through sockets stack on top of accessory headers...
The Parallax Inc through-hole, 80-way edge connector socket with 1.27 mm spacing holds the P2 edge module in a vertical orientation on a printed circuit board. This is a low insertion-force connect...
The Parallax Inc P2 Edge Mini Breakout Board provides a compact interface to the P2 Edge Module for experimenting and developing with the Propeller 2 microcontroller.Solder-free prototyping, header...
The Parallax Inc Propeller 2 Eval Board Rev C is designed for experimentation and characterization of the Propeller 2 multicore microcontroller engineering samples. Multiple ground points, power su...
The Parallax Inc “;P2”; Propeller is a multicore microcontroller containing 8 identical 32-bit processors connected to a common hub. The hub provides a shared RAM, a CORDIC math solver, and houseke...
The Parallax Inc USB to 2.1 mm ID centre positive power cord designed for use with the USB mains adapter. Together, these two parts provide a reliable 5V, high-current power supply. Use this pair w...
Propeller 1 Microcontrollers. The Parallax P8X32A (Propeller) is an 8-core 32-bit microprocessor designed to provide high-speed processing for embedded systems.It is available in two package format...
Propeller 1 Microcontrollers. The Parallax P8X32A (Propeller) is an 8-core 32-bit microprocessor designed to provide high-speed processing for embedded systems.It is available in two package format...
The Parallax Inc P2 Edge Module is a simple way to get started with the Propeller 2 multicore microcontroller. In addition to speeding development, this module provides an optimal P2 building block...
The Parallax Inc low cost XBee USB adapter board comes ready to connect to XBee module and computer’s USB port. A 40-pin SIP header is included for optional use with breadboards or through-hole boa...
The Parallax Inc low cost XBee Adapter Board comes in a kit form and provides a cost-effective solution to interfacing to any XBee or XBee Pro module. By using this adapter board it can provide an ...
Aandacht! Het product is alleen verkrijgbaar in de hoeveelheid die beschikbaar is in het magazijn. Bij grotere bestellingen wordt de hoeveelheid verandert in de beschikbare hoeveelheid. Producent: ...
