RawlPlug Steel Masonry Anchor M12 x 125mm, 20mm Fixing Hole

ETA-11/0479. RawlPlug R-RBP Rawlbolt™ Expanding Shield Anchor Bolt Projecting Fixings. From RawlPlug this is the R-RBP Rawlbolt expanding, bolt projecting mechanical shield anchor for use in cracked and non-cracked concrete plus meeting the recognized industry standards ETA-11/0479, plus the R-RBP is recommended for fire-resistant applications. The RawlPlug Rawlbolt is the original mechanical anchor with all others produced after the Rawlbolt launch. The sleeve of the rawlbolt is expanding, in 3-pieces providing you with maximum safety and optimal load and can be used in any material. Various diameter of Rawlbolt are available from M6 to M20 and the R-RBL is mainly for use in cracked and con-cracked concrete (ETA option 1), hollow core slabs, flooring blocks and ceramics. This mechanical shield anchor loose bolt is truly all-purpose making it one of the most popular loose bolts available. Features and Benefits Masonry Fixings. ;ul> ;li>R-RBP Rawlbolt Mechanical Shield Anchor Plug Fixing. ;/li> ;li>Bolt projecting. ;/li> ;li>All purpose. ;/li> ;li>Recommended for fire resistance applications. ;/li> ;li>Expanding (3-pieces expansion anchor). ;/li> ;li>Maximum safety and optimal load. ;/li> ;li>Diameter available from M6 to M20. ;/li> ;li>For use in any substrate. ;/li> ;li>For use in cracked and non-cracked concrete (ETA option 1), hollow core slabs, flooring blocks and ceramics. ;/li> ;/ul>. Typical R-RBP Rawlbolt Mechanical Shield Anchor Bolt Projecting Fixings Applications. ;ul> ;li>Roller shutter doors. ;/li> ;li>Fire doors. ;/li> ;li>Structural steel-work. ;/li> ;li>Security grills. ;/li> ;li>Heavy machinery. ;/li> ;li>Pipework and ductwork supports. ;/li> ;/ul>. Material the R-RBP Rawlbolt Bolt Projecting Anchors are Compatible with?. ;ul> ;li>Cracked concrete C20/25-C50/60. ;/li> ;li>Non-cracked concrete C20/25-C50/60. ;/li> ;li>Unreinforced concrete. ;/li> ;li>Reinforced concrete. ;/li> ;li>Solid clay brick ≥ 20MPa. ;/li> ;li>Hollow Lightweight Concrete Block LAC 5 ≥ 5MPa. ;/li> ;li>Hollow Sand-lime Brick ≥ 15MPa. ;/li> ;li>Concrete hollow floor block (Teriva). ;/li> ;li>Hollow-core Slab C20/25. ;/li> ;li>Hollow-core Slab C30/37-C50/60. ;/li> ;/ul>. R-RBP Rawlbolt Bolt Projecting Anchors Plug Fixings Available?. ;ul> ;li>Stock number ; 279048 279048 , M6, 12 mm x 80 mm. ;/li> ;li>Stock number ; 279054 279054 , M8, 14 mm x 75 mm. ;/li> ;li>Stock number ; 279060 279060 , M10, 16 mm x 105 mm. ;/li> ;li>Stock number ; 279076 279076 , M12, 20 mm x 125 mm. ;/li> ;li>Stock number ; 525357 525357 , M6, 12 mm x 65 mm. ;/li> ;li>Stock number ; 525363 525363 , M6, 12 mm x 115 mm. ;/li> ;li>Stock number ; 525379 525379 , M8, 14 mm x 90 mm. ;/li> ;li>Stock number ; 525385 525385 , M8, 14 mm x 125 mm. ;/li> ;li>Stock number ; 525391 525391 , M10, 16 mm x 90 mm. ;/li> ;li>Stock number ; 525408 525408 , M10, 16 mm x 135 mm. ;/li> ;li>Stock number ; 528283 528283 , M12, 20 mm x 110 mm. ;/li> ;li>Stock number ; 528299 528299 , M12, 20 mm x 170 mm. ;/li> ;li> ;/li> ;/ul>. How to use the R-RBP Rawlbolt Loose Bolt Anchors?. ;ul> ;li>Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed. ;/li> ;li>Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blow-pump). ;/li> ;li>Remove the pre-assembled nut and washer and insert the anchor into the drilled hole. ;/li> ;li>Gently tap into the drilled hole till flush with the surface. ;/li> ;li>Position the fixture over the projecting bolt. ;/li> ;li>Add the washer and nut then tighten carefully, only to the recommended torque. ;/li> ;/ul>