RawlPlug Steel Masonry Anchor M6 x 83mm, 12mm Fixing Hole

RawlPlug R-RBL-H Rawlbolt™ All Purpose Shield Anchor Plug Hook Bolt. From RawlPlug this is the R-RBL-H Rawlbolt shield anchor Hook bolt plug, one of RawlPlug ‘s most sought after all purpose expanding shield anchors. The R-RBL-H Rawlbolt is the Hook bolt version, designed to provide you with maximum performance. The expanding sleeve is made up of 3-pieces providing excellent expansion and optimum load safety for any material. Features and Benefits. ;ul> ;li>R-RBL-H Rawlbolt Expanding Hook Bolt Plug. ;/li> ;li>Shield anchor. ;/li> ;li>Expanding. ;/li> ;li>Excellent durability. ;/li> ;li>3-Piece expanding sleeve. ;/li> ;li>Optimal load and safety capacity. ;/li> ;li>Used in any material. ;/li> ;li>Suitable for permanent and temporary anchoring. ;/li> ;/ul>. ;ul> ;li> Safety Note: Hook Rawlbolts and not suitable for all Arrest Systems or shock loading. ;/li> ;/ul>. Typical Shield Anchor Hook Bolt Fixings Applications. ;ul> ;li>Supporting ladder restraints. ;/li> ;li>Supporting Guy ropes, stays and cables ;/li> ;/ul>. Material the R-RBL-H Rawlbolt Hook Bolts are Compatible with?. Approved for use in:. ;ul> ;li>Cracked concrete C20/25-C50/60. ;/li> ;li>Non-Cracked concrete C20/25-C50/60. ;/li> ;li>Unreinforced concrete. ;/li> ;li>Reinforced concrete. ;/li> ;li>Solid clay brick ≥ 20MPa. ;/li> ;li>Hollow lightweight concrete block LAC 5 ≥ 5MPa. ;/li> ;li>Hollow sand lime brick ≥ 15MPa. ;/li> ;li>Concrete hollow floor block (Teriva). ;/li> ;li>Hollow core slab C20/25. ;/li> ;li>Hollow core slab C30/37-C50/60. ;/li> ;/ul>. R-RBL-H Rawlbolt Expansion Hook and Eye Bolts Fixings Available?. ;ul> ;li>Stock number ; 528227 528227 , M6, Shield anchor Eye Bolt, 12 mm x 83 mm. ;/li> ;li>Stock number ; 528205 528205 , M6, Shield anchor Hook Bolt, 12 mm x 83 mm. ;/li> ;li>Stock number ; 528233 528233 , M8, Shield anchor Eye Bolt, 14 mm x 98 mm. ;/li> ;li>Stock number ; 528211 528211 , M8, Shield anchor Hook Bolt, 14 mm x 98 mm. ;/li> ;li>Stock number ; 6816738 6816738 , M10, Shield anchor Eye Bolt, 16 mm x 120 mm. ;/li> ;li>Stock number ; 6816735 6816735 , M10, Shield anchor Hook Bolt, 16 mm x 120 mm. ;/li> ;li>Stock number ; 6816731 6816731 , M12, Shield anchor Eye Bolt, 20 mm x 145 mm. ;/li> ;li>Stock number ; 6816744 6816744 , M12, Shield anchor Hook Bolt, 20 mm x 145 mm. ;/li> ;/ul>. How to use the R-RBL-H Rawlbolt Expansion Hook / Eye Bolts?. ;ul> ;li>Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed. ;/li> ;li>Special note: If fixing into brickwork avoid all mortar joint areas. ;/li> ;li>Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump). ;/li> ;li>Insert the anchor into the pre-drilled hole till it is flush with the surface then position the Hook as required. ;/li> ;li>Tighten the fixing carefully, only to the recommended torque using the Hex but and not the Hook. ;/li> ;/ul>