|  |
| |
| Artikelnr.:
CINL7-27074810 Fabrikantnr.:
750-522 EAN/GTIN:
geen gegevens |
|
|
| | |
| - The digital output module controls actuators via semiconductor outputs.
- The bus module receives the control signal via a fieldbus coupler.
- The control of the outputs is fully isolated.
- The outputs are switched at the zero cross.
- Power supply for the outputs is provided via the power jumper contacts.
- Each output has its own overload protection which is realized via an internal temperature limit. In case of an overload, the bus module switches off the output. After the output connection has cooled down, it triggers the output again. The error bit reports the overload in the process image.
Meer informatie: Gewicht en omvang | Breedte | 24 mm | | Diepte | 100 mm | | Hoogte | 69.8 mm | | Gewicht | 107.288 g | Eisen aan de omgeving | Bedrijfstemperatuur (T-T) | 0 - 55 °C | | Temperatuur bij opslag | 25 - 85 °C | Energie | Stroomverbruik (intern) | 40 mA | Kenmerken | Type product | Digitale outputmodule | | Aantal kanalen | 2 kanalen | | Interne bitbreedte | 2 Bit | | Striplengte (max) | 9 mm | | Vuurbelasting | 3.367 MJ | | Isolatie | 3 kV | | Geleidingsoppervlak (min) | 0.08 mm² | | Geleidingsoppervlak (max) | 2.5 mm² | | Internationale veiligheidscode (IP) | IP20 | | Over voltage bescherming | Ja |
|
| | |
| | | |
| |