sensata / cynergy3  (888 artikelen gevonden)

Contact Configuration = SPST Coil Voltage = 5V dc Mounting Type = PCB Mount Maximum Switching Current AC = 2 A Maximum Switching Current DC = 2 A Maximum Switching Voltage AC = 7000V Maximum Switch...

Product Range - Operating Pressure Max - Sensor Body Material PP (Polypropylene) Output Current 600 mA SVHC No SVHC (25-Jun-2020)

HV Vacuum Encapsulated D Series. These high voltage PCB and panel mount reed relays have high isolation voltages of up to 15kV. Applications include test equipment and high voltage power supplies. ...

Product Range - Operating Pressure Max 10 bar Sensor Body Material Stainless Steel Output Current 500 mA SVHC No SVHC (25-Jun-2020)

Vacuum Encapsulated D Series, Panel Mount. 50W switching 7kVdc or ac peak switching voltage 10kV contact isolation 17kV contact to coil isolation Insulation resistance 10 ;sup>10 ;/sup> ohms Contac...

Product Range RSF40 Series Operating Pressure Max - Sensor Body Material PP (Polypropylene) Output Current 600 mA SVHC No SVHC (17-Jan-2023)

Cynergy3 Flow Detection SwitchThe Cynergy3 flow detection switch has a maximum flow rate of 0.90L/min designed for use in liquid flow systems at pressures up to 10bar and temperatures up to 85°C. I...

Product Range RSF70 Series Operating Pressure Max - Sensor Body Material PP (Polypropylene) Output Current 600 mA SVHC No SVHC (17-Jan-2023)

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads. Cynergy3 Horizon...

Product Range RSF70 Series Operating Pressure Max - Sensor Body Material PP (Polypropylene) Output Current 600 mA SVHC No SVHC (17-Jan-2023)

Device Type = Float Mounting Type = Vertical Switch Output = NO/NC Body Material = Polyphenylene Sulfide Minimum Operating Temperature = -10°C Maximum Operating Temperature = +105°C Maximum AC Volt...

Cynergy3 Float SwitchThe Cynergy3 SSF28 series float switch is a vertical mount type and has direct load output. This float switch has a stainless steel 316L body. It has a maximum operating pressu...

Cynergy3 Float SwitchThe Cynergy3 float switch is a vertical mount type and has direct load output. This float switch has a polyphenylene sulphide body. The switch has a switching depth of 123mm to...

HV Vacuum Encapsulated D Series. These high voltage PCB and panel mount reed relays have high isolation voltages of up to 15kV. Applications include test equipment and high voltage power supplies. ...

The cable entry point must NOT under any circumstances be submerged. On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside. On the Vertical t...