Cynergy3 FS Series Flow Controller, 0.9 L/min, Relay Output, 240 V, 15 mm Pipe

Cynergy3 Flow Detection SwitchThe Cynergy3 flow detection switch has a maximum flow rate of 0.90L/min designed for use in liquid flow systems at pressures up to 10bar and temperatures up to 85°C. Its design is based around a moving magnet and a fixed reed switch with a low flow restriction. This switch is designed to be used in liquids only and should not be used in systems with significant amounts of solid particles. This flow switch can be mounted horizontally or vertically and has minimal flow restriction. It is ideally used in water but can be used in weak acidic liquids. Note: Not to be used in any chlorinated liquidsFeatures and Benefits15mm and 22mm tube versions Low flow version available in a 15mm tube Release flow rate is 0.25L/min Use in cold and hot water up to 85°C Mainly for use with hot or cold water however, they may also be used with a wide range of chemicals Pressure rating is 150psi maximum Switching current is 1A DC or AC (rms) Switching voltage is 240V DC or AC (rms) Switching power is 15W (15VA) resistive loadsApplicationsFlow measurement and dosing control Industrial useCertificationsWRAS approved